EVX100 - Electric charger Megger - Free user manual and instructions
Find the device manual for free EVX100 Megger in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electrical Test Instrument |
| Brand | Megger |
| Model | EVX100 |
| Display | LCD with backlight |
| Power Supply | 4 x AA batteries (1.5V) |
| Dimensions | 180 x 80 x 40 mm |
| Weight | 0.5 kg |
| AC Voltage Range | 0 - 600 V |
| DC Voltage Range | 0 - 600 V |
| Resistance Range | 0 - 40 MΩ |
| Continuity Test | Yes, with audible beeper |
| Safety Rating | CAT III 600V |
| IP Protection | IP40 |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Auto Power Off | Yes, after 15 minutes idle |
| Data Hold | Yes |
| Low Battery Indicator | Yes |
| Cleaning | Wipe with a dry, soft cloth |
| Calibration | Recommended annually |
Frequently Asked Questions - EVX100 Megger
How do I replace the batteries in the Megger EVX100?
To replace batteries, switch off the device, open the battery compartment on the back, remove old batteries, and insert four new AA batteries observing polarity. Close compartment securely.
What is the maximum voltage the Megger EVX100 can measure?
The Megger EVX100 can measure AC and DC voltages up to 600 V.
How do I perform a continuity test?
Select continuity mode using the function switch. Connect test leads to the circuit. The device will emit an audible beep if the resistance is below approximately 50 Ω.
What does the low battery indicator mean?
When the battery voltage drops below a certain level, the low battery icon appears on the display. Replace batteries promptly to ensure accurate measurements.
Can the Megger EVX100 test capacitors?
The EVX100 does not have a dedicated capacitance measurement function. It is not designed to test capacitors directly.
How often should I calibrate my Megger EVX100?
Megger recommends annual calibration to maintain accuracy. Please contact an authorized service center for calibration.
What safety precautions should I take when using the EVX100?
Always use the device with the rated safety category (CAT III 600V). Do not exceed voltage limits. Inspect test leads for damage before use. Use appropriate personal protective equipment.
Does the EVX100 have an auto power-off feature?
Yes, the EVX100 automatically powers off after 15 minutes of inactivity to conserve battery life.
What is the weight and dimensions of the Megger EVX100?
The device weighs approximately 0.5 kg and measures 180 x 80 x 40 mm.
How do I clean the Megger EVX100?
Clean the device exterior with a dry, soft cloth. Do not use solvents or abrasive cleaners. Keep the device dry.
User questions about EVX100 Megger
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electric charger in PDF format for free! Find your manual EVX100 - Megger and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EVX100 by Megger.
USER MANUAL EVX100 Megger
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Megger
Model : EVX100
Category : Electric charger