CA30 - Measurement Megger - Free user manual and instructions
Find the device manual for free CA30 Megger in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Clamp Meter |
| Brand | Megger |
| Model | CA30 |
| Measurement Functions | AC/DC Current, AC/DC Voltage, Resistance, Continuity, Capacitance, Frequency, Temperature |
| AC Current Range | 0.1 A to 600 A |
| AC Current Accuracy | ±2% + 5 digits |
| DC Current Range | 0.1 A to 600 A |
| DC Current Accuracy | ±2% + 5 digits |
| AC Voltage Range | 0.1 V to 600 V |
| DC Voltage Range | 0.1 V to 600 V |
| Resistance Range | 0.1 Ω to 40 MΩ |
| Capacitance Range | 1 nF to 4000 μF |
| Frequency Range | 10 Hz to 10 kHz |
| Temperature Range | -20°C to 1000°C (type K thermocouple) |
| Display | LCD, 4000 counts, with backlight |
| True RMS | Yes, for AC measurements |
| Auto-Ranging | Yes |
| Data Hold | Yes |
| Peak Hold | Yes |
| Safety Rating | CAT IV 600 V, CAT III 1000 V |
| Power Supply | 2 x 1.5 V AA batteries |
| Dimensions | 230 x 80 x 40 mm |
| Weight | Approximately 300 g (including batteries) |
| Accessories Included | Test leads, temperature probe, carrying case, batteries, user manual |
| Cleaning and Maintenance | Wipe with a dry, lint-free cloth. Do not use solvents. |
| Warranty | 1 year |
Frequently Asked Questions - CA30 Megger
How do I replace the batteries in the Megger CA30?
Turn off the meter and disconnect test leads. Remove the battery cover screw on the back, lift the cover, replace the two AA batteries observing polarity, and reattach the cover.
Can the CA30 measure AC and DC current simultaneously?
No, the CA30 measures either AC or DC current. Use the function switch to select the desired mode.
What is the maximum conductor size for the clamp?
The clamp jaw opens to accept conductors up to 30 mm in diameter (approximately 500 MCM).
Is the CA30 safe for use on high-energy circuits?
Yes, the CA30 is rated CAT IV 600 V and CAT III 1000 V, making it suitable for use on most commercial and industrial circuits. Always follow safety precautions.
How do I measure resistance with the CA30?
Set the function switch to the Ω position. Insert the test leads into the V/Ω and COM jacks. Touch the probes to the component and read the resistance value on the display. For accurate readings, ensure the circuit is de-energized.
What does 'True RMS' mean on the CA30?
True RMS allows the meter to accurately measure non-sinusoidal AC waveforms. The CA30 calculates the true root mean square value of the current or voltage, providing reliable readings even with distorted signals.
Why is my CA30 showing 'OL' on the display?
'OL' stands for Over Limit. It indicates the measurement exceeds the selected range. Switch to a higher range or check if the input is within the meter's specifications.
Can I measure temperature with the CA30?
Yes, the CA30 supports temperature measurement using a type K thermocouple probe (included). Set the function switch to the temperature position, connect the probe to the COM and V/Ω jacks, and place the probe on the object.
How do I clean the CA30?
Wipe the exterior with a dry, lint-free cloth. For stubborn dirt, use a cloth slightly dampened with water. Do not use abrasive cleaners, solvents, or immerse the meter in liquid.
What is the warranty period for the Megger CA30?
The Megger CA30 comes with a 1-year limited warranty against defects in materials and workmanship. Megger will repair or replace the unit at their discretion.
User questions about CA30 Megger
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual CA30 - Megger and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CA30 by Megger.
USER MANUAL CA30 Megger
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Megger
Model : CA30
Category : Measurement