Wiesenfield UNI-LP-100 - Lighting

UNI-LP-100 - Lighting Wiesenfield - Free user manual and instructions

Find the device manual for free UNI-LP-100 Wiesenfield in PDF.

📄 65 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Wiesenfield UNI-LP-100 - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Professional LED lamp
Brand Wiesenfield
Model UNI-LP-100
Dimensions (L x W x H) 30 x 20 x 10 cm
Net weight 1.5 kg
Power supply 220-240 V ~ 50/60 Hz
Nominal power 50 W
Light source type Integrated non-replaceable LED
Luminous flux 4000 lm
Color temperature 4000 K (neutral white)
Protection rating IP54
Housing material Aluminum and polycarbonate
Beam angle 120°
LED lifespan 30 000 hours
Main functions General indoor/outdoor lighting, wall or ceiling mounting
Maintenance and cleaning Wipe with a soft, dry cloth. Do not use abrasive products.
Safety Do not cover the device. Avoid excessive humidity. Disconnect before maintenance.
Spare parts and repairability Non-replaceable LED. The power supply can be replaced by a professional.
Warranty 2 years

Frequently Asked Questions - UNI-LP-100 Wiesenfield

How to install the UNI-LP-100 luminaire?
Fix the wall or ceiling bracket using the provided dowels. Connect the electrical wires (phase, neutral, ground) according to the diagram in the manual. Screw the luminaire body onto the bracket.
Can this luminaire be used outdoors?
Yes, the IP54 protection rating makes it resistant to water splashes and dust, suitable for sheltered outdoor areas.
Is the brightness adjustable?
No, this model is not dimmable. It operates at full power (50 W, 4000 lm).
How to replace a bulb?
The LEDs are integrated and non-replaceable. At the end of life (approx. 30,000 hours), the luminaire must be replaced.
What is the color temperature of the light?
The light is neutral white at 4000 K, ideal for work or ambient lighting.
Does the luminaire require special maintenance?
Clean it with a soft, dry cloth. Avoid chemical products that could damage the housing.
What types of cables should be used for connection?
Use cables of appropriate cross-section (1.5 mm² minimum) and follow the connection diagram.
Is there a risk of overheating?
The aluminum housing dissipates heat efficiently. Never cover the luminaire and maintain a safety distance.
How to obtain spare parts?
Contact Wiesenfield customer service. Only the power supply can be replaced by a professional.
What to do if the luminaire does not turn on?
Check the power supply (fuse, circuit breaker), connections, and that the lamp is not damaged. If the problem persists, consult an electrician.

User questions about UNI-LP-100 Wiesenfield

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual UNI-LP-100 - Wiesenfield and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UNI-LP-100 by Wiesenfield.

USER MANUAL UNI-LP-100 Wiesenfield

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Wiesenfield

Model : UNI-LP-100

Category : Lighting