II 3E53E0B-80 - Dishwasher IBERNA - Free user manual and instructions
Find the device manual for free II 3E53E0B-80 IBERNA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Built-in dishwasher |
| Brand | Iberna |
| Model | II 3E53E0B-80 |
| Capacity | 14 place settings |
| Energy class | A+ |
| Noise level | 44 dB(A) |
| Water consumption | 10 L per cycle |
| Power consumption | 1.05 kWh per cycle |
| Programs | 5 (Eco, Intensive, Normal, Quick, Glass) |
| Drying system | Condensation drying |
| Height | 85 cm |
| Width | 60 cm |
| Depth | 60 cm |
| Weight | 45 kg |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Safety features | Child lock, water leak protection, anti-flood system |
| Interior material | Stainless steel |
| Control type | Electronic with LED display |
| Additional features | Delay start, half load option, adjustable upper basket, cutlery basket |
Frequently Asked Questions - II 3E53E0B-80 IBERNA
How do I properly load the dishwasher for best cleaning results?
Place larger items like pots and pans on the lower basket and plates, glasses on the upper basket. Ensure water spray can reach all surfaces. Avoid blocking the spray arms.
What type of detergent should I use?
Use a dishwasher detergent (powder, gel, or tabs). For best results, use a detergent with rinse aid and salt functions. Place detergent in the dispenser compartment.
Why is there water left at the bottom after a cycle?
This could be due to a clogged filter or drain hose blockage. Clean the filter assembly and check the drain hose for kinks. Also ensure the drain pump is not obstructed.
How do I clean the filter?
Remove the lower basket and unscrew the filter assembly located at the bottom. Rinse it under running water and scrub if necessary. Reinstall securely. Clean the filter once a month.
What does the error code E1 mean?
Error code E1 indicates a water intake issue. Check that the water tap is fully open and the inlet hose is not kinked or frozen. If problem persists, contact support.
How do I adjust the rinse aid dosage?
Open the rinse aid dispenser cap and adjust the dial to a higher setting (1-6) if spotting occurs, or lower if excessive foaming. Typically setting 3-4 is suitable.
Can I wash delicate items like crystal glasses?
Yes, use the Glass program which operates at lower temperatures and gentle water pressure. Place delicate items securely in the upper basket.
How do I enable the child lock?
Press and hold the Child Lock button (usually marked with a key icon) for 3 seconds until the indicator lights up. To disable, repeat the same process.
What is the delay start function?
The delay start allows you to set a timer (1-24 hours) so the dishwasher starts at a later time. Press the Delay button and select the desired hours.
Where can I find the product's energy label?
The energy label is located on the right side of the dishwasher door or in the user manual. It provides information on energy consumption, noise level, and capacity.
User questions about II 3E53E0B-80 IBERNA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual II 3E53E0B-80 - IBERNA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. II 3E53E0B-80 by IBERNA.
USER MANUAL II 3E53E0B-80 IBERNA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IBERNA
Model : II 3E53E0B-80
Category : Dishwasher