IDIH 2L952-80 - Dishwasher IBERNA - Free user manual and instructions
Find the device manual for free IDIH 2L952-80 IBERNA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Iberna |
| Model | IDIH 2L952-80 |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | 42 kg |
| Power Supply | 220-240 V / 50 Hz, 1900 W |
| Number of Place Settings | 14 |
| Energy Efficiency Class | E |
| Programs | Eco, Intensive, Normal, Quick 30 min, Glass |
| Additional Functions | Half load, Delay start, Extra dry |
| Noise Level | 49 dB(A) |
| Water Consumption per Cycle | 9.5 L (Eco program) |
| Annual Energy Consumption | 294 kWh |
| Safety Features | Child lock, Anti-flood system, Leak protection |
| Maintenance | Clean filter regularly, Use rinse aid, Clean spray arms |
| Spare Parts | Filters, spray arms, racks, door seal (user-replaceable) |
| Repairability Index | 7.2 / 10 |
Frequently Asked Questions - IDIH 2L952-80 IBERNA
How do I install the Iberna IDIH 2L952-80 dishwasher?
Ensure the appliance is level and connected to water and electricity. Refer to the installation manual for detailed steps. Recommended to hire a professional.
What do error codes mean?
Common codes: E1 (water inlet issue), E2 (drain problem), E3 (heating failure). Check water supply, drain hose, and filter. If persists, contact service.
How to clean the dishwasher filter?
Turn off the appliance. Remove the lower rack, twist and pull out the filter assembly. Rinse under running water and brush off debris. Reassemble every 1-2 months.
Why is the dishwasher not drying dishes?
Ensure rinse aid is filled and the ‘Extra Dry’ option is selected if available. Check that the heater is working and the door is fully closed.
Can I use regular dish soap instead of dishwasher detergent?
No, use only dishwasher detergent (powder, gel, or tablets). Regular soap creates excessive suds and can damage the machine.
How to reset the dishwasher?
Press and hold the Start button for 3 seconds or unplug the appliance for 10 minutes. This clears temporary error codes and resets the control board.
What is the capacity of this dishwasher?
It holds up to 14 place settings, suitable for a family of 4-5.
How to use the delay start function?
Select your program, then press the Delay button to set a delay from 1 to 24 hours. The dishwasher will start automatically after the selected time.
What should I do if the dishwasher leaves spots?
Check rinse aid level and water hardness setting. Use a dishwasher salt if needed. Also clean the spray arms and filter.
How to replace the door seal?
Purchase a compatible seal (part number available in manual). Remove old seal, clean groove, and press new seal into place. Ensure proper alignment to prevent leaks.
User questions about IDIH 2L952-80 IBERNA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual IDIH 2L952-80 - IBERNA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IDIH 2L952-80 by IBERNA.
USER MANUAL IDIH 2L952-80 IBERNA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IBERNA
Model : IDIH 2L952-80
Category : Dishwasher