DUM168 - Hedge Trimmers MAKITA - Free user manual and instructions
Find the device manual for free DUM168 MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hedge Trimmer |
| Brand | Makita |
| Model | DUM168 |
| Blade Length | 500 mm |
| Max Cutting Diameter | 15 mm |
| No-load Cutting Speed | 1400 min⁻¹ |
| Motor Type | Brushless |
| Battery Voltage | 18 V |
| Battery Type | Lithium-ion (Li-ion) |
| Battery Included | No (sold separately) |
| Weight (without battery) | 2.8 kg |
| Sound Pressure Level | 82 dB(A) |
| Sound Power Level | 92 dB(A) |
| Vibration Level (hand-arm) | 2.5 m/s² |
| Safety Guard | Two-finger trigger with lock-off |
| Recommended Battery Capacity | 2.0 Ah to 6.0 Ah |
| Runtime (5.0 Ah battery) | Approximately 60 minutes |
| Blade Maintenance | Regular cleaning and lubrication |
| Spare Parts Available | Blade, battery, charger, guards |
| Warranty | 2 years (depending on country) |
Frequently Asked Questions - DUM168 MAKITA
Which battery to use with the Makita DUM168?
The Makita DUM168 uses 18 V lithium-ion batteries from the Makita range. Capacities from 2.0 Ah to 6.0 Ah are compatible. The battery is not included and must be purchased separately.
How to sharpen the hedge trimmer blade?
It is recommended to have the blade sharpened by a professional. If you do it yourself, use a fine file and follow the original angle. Disconnect the battery before any intervention.
How to clean the hedge trimmer after use?
Clean the blades with a soft brush and soapy water. Dry thoroughly and apply a thin layer of anti-rust oil. Do not use corrosive products.
Does the hedge trimmer make a lot of noise?
The sound pressure level is about 82 dB(A) and the sound power level is 92 dB(A). Wear hearing protection during use.
Can I use a higher capacity battery?
Yes, you can use batteries up to 6.0 Ah, which will increase runtime. Make sure they are compatible with the Makita 18 V range.
How to replace the blade?
Remove the battery, loosen the blade fixing screws, remove the old blade and install the new one respecting the cutting direction. Tighten the screws to the recommended torque.
What to do if the hedge trimmer does not start?
Check that the battery is charged and properly inserted. If the problem persists, check the safety lock and connections. Contact after-sales service if necessary.
Does the motor heat up normally?
Yes, some heat is normal during prolonged use. If the motor becomes too hot to touch, stop the tool and let it cool down. Clean the ventilation slots.
How to store the hedge trimmer in winter?
Clean it thoroughly, remove the battery, apply oil to the blades and store it in a dry, frost-free place. Use a protective case if available.
Where to find spare parts?
You can find spare parts at authorized Makita dealers, on the official website or at after-sales service centers. Always use original parts.
User questions about DUM168 MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hedge Trimmers in PDF format for free! Find your manual DUM168 - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DUM168 by MAKITA.
USER MANUAL DUM168 MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : DUM168
Category : Hedge Trimmers