ICR-1601W - Network router Advantech - Free user manual and instructions
Find the device manual for free ICR-1601W Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial LTE Router |
| Model Number | ICR-1601W |
| Brand | Advantech |
| Wireless Standards | IEEE 802.11b/g/n, 4G LTE |
| LTE Bands | B1/B3/B5/B7/B8/B20/B28 (Worldwide) |
| Wi-Fi Speed | Up to 300 Mbps (2.4 GHz) |
| Ethernet Ports | 2 x RJ45 10/100 Mbps |
| Serial Interface | 1 x RS232/RS485 (DB9) |
| Digital I/O | 2 inputs, 2 outputs (optional) |
| Power Input | 12 to 48 VDC (terminal block) |
| Power Consumption | 8 W (typical) |
| Dimensions (W x H x D) | 100 x 30 x 100 mm (approx) |
| Weight | 200 g (approx) |
| Operating Temperature | -40 °C to 75 °C |
| Mounting | DIN rail or wall mount |
| VPN Support | OpenVPN, IPsec, PPTP, L2TP |
| Security | Firewall, NAT, VLAN, MAC filtering |
| Management | Web UI, SNMP, Cloud (AWORKS) |
| SIM Card Slot | 1 x Mini SIM (2FF) |
| Antenna Connectors | 2 x SMA (LTE), 1 x RP-SMA (Wi-Fi) |
| Maintenance | Clean with a dry, lint-free cloth |
| Spare Parts | Antennas, power adapter, DIN rail bracket |
Frequently Asked Questions - ICR-1601W Advantech
How do I reset the Advantech ICR-1601W to factory defaults?
Press and hold the RST button (located on the front panel) for at least 5 seconds using a paperclip. The device will reboot and all settings will be restored to factory defaults.
What is the default IP address and login credentials?
Default IP: 192.168.1.1, Username: admin, Password: admin (or leave blank). Change the password after first login.
How do I insert a SIM card?
Power off the device. Insert a standard Mini SIM (2FF) into the SIM slot on the front panel until it clicks. Ensure the gold contacts face down. Power on and wait for the LTE LED to turn solid.
What do the LED indicators mean?
PWR: solid green (power on). LTE: solid green (registered), flashing (searching). Wi-Fi: solid green (active). LAN: solid green (link), flashing (activity). USR: custom configurable.
How do I configure Wi-Fi on the ICR-1601W?
Access the web interface at 192.168.1.1. Go to Interfaces > Wi-Fi. Enable the wireless radio, set SSID and security (WPA2 recommended). Apply and reboot if prompted.
Can I use the ICR-1601W with a VPN?
Yes. It supports OpenVPN, IPsec, PPTP, and L2TP. Configure under Services > VPN. You can set up client or server modes.
How do I update the firmware?
Download the latest firmware from Advantech support. In the web UI, go to System > Firmware, choose the file, and click Update. Do not power off during the update.
The device is not connecting to the internet. What should I check?
Verify SIM card is inserted correctly and activated. Check LTE signal strength in the web UI. Ensure APN settings match your carrier. Also check the firewall rules are not blocking traffic.
How do I mount the ICR-1601W on a DIN rail?
Attach the DIN rail clip (included) to the back of the device. Snap the device onto a 35 mm DIN rail. Ensure it clicks securely. For wall mount, use the screw holes on the sides.
What is the power consumption and recommended power supply?
Typical power consumption is 8 W. Use a 12-48 VDC power supply with at least 1 A capacity. Connect via the 2-pin terminal block observing polarity.
User questions about ICR-1601W Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network router in PDF format for free! Find your manual ICR-1601W - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ICR-1601W by Advantech.
USER MANUAL ICR-1601W Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : ICR-1601W
Category : Network router