Tri Pearl - Professional lighting American Audio - Free user manual and instructions
Find the device manual for free Tri Pearl American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DJ Lighting Effect |
| Model | Tri Pearl |
| Brand | American Audio |
| Dimensions | 7.5 x 7.5 x 9.8 inches (19 x 19 x 25 cm) |
| Weight | 3.5 lbs (1.6 kg) |
| Power Supply | AC 100-240V, 50/60Hz (external adapter) |
| Power Consumption | 30W |
| Light Source | 3 x 10W RGB LEDs (tri-color) |
| Color Mixing | RGB color mixing with built-in programs |
| Control Modes | Automatic, sound-activated, master/slave, DMX (3 channels) |
| DMX Channels | 3 or 7 selectable |
| Beam Angle | 50° |
| Strobe Rate | 0-20 Hz |
| Cooling | Passive convection |
| Housing Material | ABS plastic with metal bracket |
| Mounting | Floor stand, truss clamp, or hanging |
| Included Accessories | Power adapter, mounting bracket, user manual |
| Maintenance | Clean lens with soft dry cloth; avoid solvents |
| Safety | Do not expose to rain or moisture; use safety cable when hanging |
| Repairability | No user-serviceable parts inside; contact authorized service |
| Certifications | CE, RoHS |
Frequently Asked Questions - Tri Pearl American Audio
How do I set up the Tri Pearl light?
Connect the power adapter to the light and plug into a mains outlet. Use the mode button to select automatic, sound-active, or DMX mode. For DMX, set the DIP switches or use the menu to assign an address.
What is the DMX channel configuration?
The Tri Pearl can operate in 3-channel or 7-channel DMX mode. In 3-channel mode, channels control red, green, and blue. In 7-channel mode, additional channels control dimmer, strobe, color macros, and speed.
How do I clean the Tri Pearl light?
Unplug the unit and allow it to cool. Use a soft, lint-free cloth slightly dampened with water to wipe the lens and housing. Do not use abrasive cleaners or solvents.
Can I use this light outdoors?
The Tri Pearl is designed for indoor use only. Exposure to rain, moisture, or extreme temperatures can damage the unit and pose an electrical hazard.
How do I replace a fuse?
The Tri Pearl uses an external power adapter with a built-in fuse. If the adapter fails, replace it with an identical rated adapter. Do not open the light fixture itself.
The light is not responding to sound. What should I do?
Ensure the light is in sound-active mode (press Mode until 'Soun' or 'AU' appears). Adjust the microphone sensitivity if available. Also check that the music has enough bass to trigger the circuit.
How do I link multiple Tri Pearl lights together?
Use DMX cables to daisy-chain units. Set the first unit as master, the others as slave. Alternatively, use the master/slave mode via the 3-pin XLR connections. The master will send signal to the slaves.
What mounting hardware do I need?
The light comes with a bracket that fits onto standard truss clamps or floor stands. For hanging, use a safety cable rated for the weight of the fixture.
The light is flickering. How can I fix it?
Check the power connection and ensure the adapter is secure. If using DMX, verify the cable and termination. In sound-active mode, flickering may be normal; adjust the strobe rate or switch to a different mode.
Can I use the Tri Pearl with a DMX controller?
Yes. Set the light to DMX mode and assign a starting address. Use a 3-pin XLR cable to connect to your controller. Refer to the manual for channel mapping.
User questions about Tri Pearl American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Professional lighting in PDF format for free! Find your manual Tri Pearl - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Tri Pearl by American Audio.