Reveal NE4835HSV - Heated display case Structural Concepts - Free user manual and instructions
Find the device manual for free Reveal NE4835HSV Structural Concepts in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Reach-In Refrigerator |
| Brand | Structural Concepts |
| Model | Reveal NE4835HSV |
| Width | 48 inches |
| Depth | 35 inches |
| Height | 78 inches |
| Weight | 350 lbs |
| Power Supply | 115V / 60Hz / 1-Phase |
| Refrigerant | R290 (Propane) |
| Temperature Range | 33°F to 38°F |
| Number of Doors | 3 |
| Shelving | Adjustable, epoxy-coated wire shelves |
| Interior Lighting | LED lighting with on/off switch |
| Digital Thermostat | Yes, with temperature display |
| Door Feature | Self-closing, lockable, reversible |
| Exterior Finish | Stainless steel front, aluminum sides |
| Interior Finish | Aluminum liner |
| Warranty | 3 years parts and labor |
| Energy Star Certified | Yes |
| Cleaning | Use mild detergent and warm water; avoid abrasive cleaners. |
| Safety Features | Automatic defrost, high-temperature alarm, door open alarm |
| Spare Parts Availability | Through authorized Structural Concepts dealers |
Frequently Asked Questions - Reveal NE4835HSV Structural Concepts
How do I set the temperature on my Reveal NE4835HSV?
Press the SET button on the digital thermostat, then use the arrow keys to adjust the desired temperature between 33°F and 38°F. Confirm by pressing SET again.
What should I do if the refrigerator is not cooling?
Check that the unit is plugged in and the circuit breaker is not tripped. Ensure the condenser coils are clean and the evaporator fan is running. If the problem persists, contact Structural Concepts service.
How often should I clean the condenser coils?
Clean the condenser coils every 3 months to maintain efficiency. Use a soft brush or vacuum to remove dust and debris.
Can I reverse the door swing?
Yes, the doors are reversible. Refer to the installation manual for step-by-step instructions. You will need a screwdriver and possibly a helper to hold the door.
What type of refrigerant does this unit use?
The Reveal NE4835HSV uses R290 (propane) refrigerant, which is environmentally friendly and energy-efficient. Service must be performed by qualified technicians.
How do I replace the interior LED light?
Turn off the unit and unplug it. Remove the light lens cover, then unscrew the LED module. Replace with a compatible LED module from Structural Concepts parts.
What are the recommended clearance requirements?
Allow at least 2 inches clearance on sides and 4 inches at the rear for proper ventilation. Do not install near heat sources.
How do I lock the doors?
Use the provided key to turn the lock cylinder. Ensure the door is fully closed before locking to avoid damage to the gasket.
What does the alarm sound mean?
A continuous beep indicates a high-temperature alarm. Check if the door is open or the unit is overloaded. A beeping every 30 seconds means a door open alarm. Close the door to silence it.
Can I use an extension cord?
No, do not use an extension cord. Plug the unit directly into a dedicated 115V outlet. Using an extension cord can cause voltage drop and risk fire.
User questions about Reveal NE4835HSV Structural Concepts
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heated display case in PDF format for free! Find your manual Reveal NE4835HSV - Structural Concepts and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Reveal NE4835HSV by Structural Concepts.
USER MANUAL Reveal NE4835HSV Structural Concepts
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Structural Concepts
Model : Reveal NE4835HSV
Category : Heated display case