ADAM-5095 - Industrial electronic module Advantech - Free user manual and instructions
Find the device manual for free ADAM-5095 Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Remote Analog Input Module |
| Model | ADAM-5095 |
| Brand | Advantech |
| Input Channels | 8 differential analog inputs |
| Input Resolution | 16-bit |
| Input Range | ±10V, ±5V, ±1V, 0-10V, 0-5V, 0-20mA (jumper selectable) |
| Sampling Rate | 10 samples per second (all channels) |
| Power Supply | 10 to 30 VDC |
| Power Consumption | 1.5 W typical |
| Dimensions (W x H x D) | 231 x 165 x 50 mm |
| Weight | 800 g |
| Operating Temperature | -10 to 70 °C |
| Storage Temperature | -25 to 85 °C |
| Communication Interface | RS-485 (2-wire) |
| Communication Protocol | Modbus/RTU |
| Isolation Voltage | 3000 VDC input to output |
| LED Indicators | Power, communication, and channel status |
| Mounting | DIN-rail or panel mount |
| Certifications | CE, FCC |
| Spare Parts | Contact Advantech local distributor for replacement modules or accessories |
| Safety Precautions | Install in dry environment, disconnect power before wiring, follow manual guidelines |
| Cleaning | Use a dry, lint-free cloth; avoid solvents |
Frequently Asked Questions - ADAM-5095 Advantech
What is the ADAM-5095?
The ADAM-5095 is an 8-channel analog input module from Advantech, designed for industrial data acquisition via RS-485 Modbus/RTU.
How do I connect the ADAM-5095?
Connect power (10-30 VDC) to the terminals, RS-485 communication cables to the A/B lines, and analog signals to the input channels as per the wiring diagram in the manual.
What is the default communication settings?
Default settings: baud rate 9600, 8 data bits, no parity, 1 stop bit, Modbus ID 1. These can be changed via software.
How can I configure the ADAM-5095?
Use the Advantech ADAM/Apax Utility software for configuration, including input range, channel enable, and filter settings.
What input ranges are supported?
Supported input ranges: ±10V, ±5V, ±1V, 0-10V, 0-5V, and 0-20mA (with external resistor for current mode). Setup via jumper and software.
Why is the module not communicating?
Check wiring (polarity), power supply (voltage >10V), RS-485 termination resistors, and verify that the Modbus ID and baud rate match your master device.
How many channels can I use simultaneously?
All 8 differential channels can be used simultaneously. The sampling rate is 10 samples/second for all channels.
Can I use the ADAM-5095 in a daisy-chain?
Yes, multiple ADAM modules can be daisy-chained on the same RS-485 bus. Each module must have a unique Modbus ID.
What is the isolation rating?
The ADAM-5095 provides 3000 VDC isolation between input and output, protecting against surges.
Where can I find the manual?
The user manual is available for free download on notice-facile.com or the Advantech website. It includes detailed wiring, configuration, and troubleshooting.
User questions about ADAM-5095 Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial electronic module in PDF format for free! Find your manual ADAM-5095 - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADAM-5095 by Advantech.
USER MANUAL ADAM-5095 Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : ADAM-5095
Category : Industrial electronic module