ADAM-6350 - Industrial electronic module Advantech - Free user manual and instructions
Find the device manual for free ADAM-6350 Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Analog Input Module |
| Brand | Advantech |
| Model | ADAM-6350 |
| Input Channels | 8 |
| Input Type | Voltage, Current, Thermocouple, RTD |
| Resolution | 16-bit |
| Input Range | ±10 V, 0-20 mA, 4-20 mA, etc. |
| Accuracy | ±0.1% FSR |
| Sampling Rate | 10 Hz per channel |
| Communication Interface | RS-485 (2-wire, half-duplex) |
| Power Supply | +10 to +30 VDC |
| Power Consumption | 1.2 W max |
| Dimensions (W x H x D) | 40 x 120 x 110 mm |
| Weight | 180 g |
| Operating Temperature | -10°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Protection Class | IP20 |
| Certifications | CE, FCC Class A |
| Warranty | 2 years |
| Maintenance | Clean with dry cloth; no special tools required |
| Safety | Overvoltage protection, reverse polarity protection |
Frequently Asked Questions - ADAM-6350 Advantech
What is the ADAM-6350 used for?
The ADAM-6350 is an analog input module used for data acquisition of voltage, current, thermocouple, and RTD signals in industrial automation.
How many channels does the ADAM-6350 have?
It has 8 differential or 16 single-ended analog input channels (configurable).
What is the communication interface of the ADAM-6350?
It uses RS-485 with Modbus RTU protocol for communication.
What power supply is required for the ADAM-6350?
The module accepts +10 to +30 VDC power supply, with typical consumption of 1.2 W.
How do I set the input range on the ADAM-6350?
Input ranges are configured via software jumpers or through Modbus commands, depending on the hardware version.
What is the maximum sampling rate of the ADAM-6350?
The maximum sampling rate is 10 Hz per channel when reading all channels.
Can the ADAM-6350 be used with thermocouples?
Yes, it supports J, K, T, E, R, S, B, N thermocouple types with cold junction compensation.
What is the accuracy of the ADAM-6350?
Accuracy is typically ±0.1% of full scale range for voltage and current inputs.
How do I verify if the ADAM-6350 is working properly?
Check the power LED and use a multimeter to measure input signals. Also confirm Modbus communication with a master device.
What maintenance does the ADAM-6350 require?
Periodically clean the exterior with a dry cloth and ensure connections are tight. No internal maintenance is required.
User questions about ADAM-6350 Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial electronic module in PDF format for free! Find your manual ADAM-6350 - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADAM-6350 by Advantech.
USER MANUAL ADAM-6350 Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : ADAM-6350
Category : Industrial electronic module