WISE-2460-MA - Capteur de vibration Advantech - Free user manual and instructions
Find the device manual for free WISE-2460-MA Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial IoT Gateway / Edge Controller |
| Dimensions | Approximately 150 x 100 x 35 mm (estimated) |
| Weight | Approximately 500 g (estimated) |
| Power Supply | DC 12-24V, typical power consumption 10W |
| Processor | ARM Cortex-A8 or similar (typical for WISE series) |
| Operating System | Linux (Advantech WISE Agent) |
| Connectivity | Ethernet (10/100/1000 Mbps), Wi-Fi (optional), Modbus TCP/RTU |
| Main Functions | Data acquisition, remote monitoring, cloud connectivity, device management |
| Input/Output | Multiple digital/analog I/O channels (depending on configuration) |
| Mounting | DIN rail or wall mount |
| Operating Temperature | -20°C to 70°C |
| Storage Temperature | -30°C to 85°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Protection Class | IP30 (typical for indoor use) |
| Care and Cleaning | Use a dry cloth to clean. Do not use solvents. Keep away from dust and moisture. |
| Safety Precautions | Follow local electrical codes. Ensure proper grounding. Do not operate in explosive environments. |
| Spare Parts and Repairability | Contact Advantech for spare parts. Repairs should be done by qualified personnel only. |
| General Information | Part of Advantech WISE series for Industry 4.0 applications. |
Frequently Asked Questions - WISE-2460-MA Advantech
How do I connect the WISE-2460-MA to my network?
Connect the Ethernet cable to the LAN port. The device will obtain an IP address via DHCP by default. You can also assign a static IP using the web interface.
What is the default login credentials for the device?
The default username is admin and the default password is admin. It is recommended to change the password after first login.
How do I reset the WISE-2460-MA to factory defaults?
Press and hold the reset button (located on the side) for about 10 seconds until the status LED blinks rapidly. The device will reboot with factory settings.
Can I connect sensors to this device?
Yes, the WISE-2460-MA supports various I/O modules. You can connect analog (0-10V, 4-20mA) and digital sensors via the expansion slots.
What software is used to configure the gateway?
You can use the built-in web interface (browser) or Advantech's WISE Agent software for advanced configuration and data management.
Does it support cloud connectivity?
Yes, it can connect to popular cloud platforms like Azure, AWS, and private clouds via MQTT or REST APIs.
How do I update the firmware?
Download the latest firmware from Advantech support portal. Log into the web interface, go to System > Firmware Update, and upload the file.
What LEDs indicate device status?
There are three LEDs: Power (green), Status (green/red), and Link (yellow). Refer to the manual for detailed behavior.
Can I mount it on a DIN rail?
Yes, the device comes with a DIN rail bracket for easy installation in industrial cabinets.
What is the power consumption?
Typical power consumption is around 10W. Use a DC power supply between 12V and 24V.
User questions about WISE-2460-MA Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Capteur de vibration in PDF format for free! Find your manual WISE-2460-MA - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WISE-2460-MA by Advantech.
USER MANUAL WISE-2460-MA Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : WISE-2460-MA
Category : Capteur de vibration