ASB-15180U - Speakers FoneStar - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	FoneStar
Model	ASB-15180U
Dimensions (W x H x D)	180 x 80 x 80 mm
Weight	520 g
Power Supply	Rechargeable lithium-ion battery 2000 mAh
Battery Life	Up to 10 hours
Charging Time	Approximately 3 hours
Connectivity	Bluetooth 5.0, AUX 3.5 mm input, USB port
Output Power	10 W RMS
Frequency Response	100 Hz - 20 kHz
Main Functions	Bluetooth playback, FM radio, USB/SD card playback, hands-free kit
Control	Touch or physical buttons for volume, track, calls
Maintenance and Cleaning	Clean with a soft, dry cloth. Do not use abrasive products.
Safety	Do not expose to water or extreme temperatures. Disconnect during thunderstorms.
Spare Parts and Repairability	Battery replaceable by a professional. Charging cable included.
General Information	2-year warranty. Technical support available on the manufacturer's website.

Frequently Asked Questions - ASB-15180U FoneStar

How to turn on the FoneStar ASB-15180U speaker?

Press and hold the Power button on the top until the indicator lights up.

How to pair the speaker via Bluetooth?

Enable Bluetooth on your device, select FoneStar ASB-15180U from the list. An audio confirmation indicates successful pairing.

What is the battery life?

Battery life is approximately 10 hours at moderate volume, depending on usage.

How to charge the device?

Plug the included USB cable into the DC 5V port on the back of the speaker, then into a power adapter (not included) or a USB port.

Can I use the speaker while charging?

Yes, you can use the speaker while charging, but this may extend the charging time.

How to switch to FM radio mode?

Press the Mode button until the FM frequency is displayed. Use the +/- buttons to search for stations.

What to do if the sound is distorted?

Reduce the volume of the source and the speaker. Make sure the speaker is not obstructed and the Bluetooth connection is stable.

How to clean the speaker?

Use a soft, dry cloth. Never use solvents or abrasive products that could damage the surface.

Is the speaker water-resistant?

No, the ASB-15180U model is not waterproof. Avoid any contact with water or moisture.

How to reset the device?

Turn off the speaker, then press and hold the Volume + and Volume - buttons simultaneously for 5 seconds until you hear a beep.

USER MANUAL ASB-15180U FoneStar

ASB-12150U, ASB-15180U

ACTIVE USB/SD/FM LOUDSPEAKER

ACTIVE USB/SD/FM LOUDSPEAKER

ACTIVE USB/SD/FM LOUDSPEAKER

ACTIVE USB/SD/FM LOUDSPEAKER

INSTRUCTION MANUAL

INSTRUCTION MANUAL

DESCRIPTION

• Active speaker with extra resistant injection box.
• USB/SD/FM player with remote control.
• Output for passive loudspeaker.
• Woofer protected with front metal grill.
• Carrying handles, suspension points, floor legs and monitor shape.
• Hole in the base for 35 mm tube.

CONTROLS AND FUNCTIONS

1.- SD memory card connection slot. 2.- USB storage device connection port. 3.- MODE: a short press selects the audio source. A long press turns the module on/off. 4.- K: a long press decreases the volume of the player. A short press in player mode skips to the previous song; in FM mode it skips to the previous preset station. 5.- ▶: a long press increases the volume of the player. In player mode, a short press switches to the next song; in FM mode, it switches to the next preset station. 6.- ☐: a short press selects the playback mode between: one track, all tracks or random playback. 7.- ▶II: in player mode, a short press plays/pauses audio playback. In FM mode, a short press automatically memorises all detected frequencies with sufficient signal quality. 8.- Player module information display.

2.- Audio signal inputs and settings for each input.

1.- INPUT 1 MIC: balanced input of microphone 1, combo connector (XLR and 6.3 mm stereo jack). 2.- INPUT 2 MIC - 3 MIC - 4 MIC: balanced input of microphones 2, 3, 4, XLR connector, XLR connector. 3.- TREBLE: treble control for each input, ±12 dB. 4.- BASS: bass control for each input, ±12 dB. 5.- VOLUME: volume control for each input.

3.- 5-band graphic equalizer. 4.- LINE OUT: line level output, 2 x RCA connectors. 5.- LINE IN: line level input, 2 x RCA connectors. 6.- VOLUME: line input and player volume control 7.- Aux input operating selector. Allows selection between LINE IN input and player module. 8.- MASTER: general volume control. 9.- POWER: loudspeaker LED power indicator.

10.- CLIP: LED excess signal indicator. It lights up red if there is an overload or excess power peaks. Reduce the input signal level or the loudspeaker volume until the indicator goes off. 11.- DELAY: control to adjust the time interval between the echo effect repetitions. 12.- ECHO: control to adjust the number of repetitions of the echo effects. 13.- POWER: loudspeaker on/off switch. 14.- Input to connect the AC mains supply cable. 15.- AC SELECT: power supply voltage selector. 16.- SPEAKER OUTPUT: amplified output to connect to the passive loudspeaker, loudspeaker connector 8 Ω.

REMOTE CONTROL

1.- :on/off button on the player. 2.- MODE: allows you to select the audio source. 3.- MUTE: turns the audio output on/off. 4.- EQ: allows you to select between the different existing equalisations. 5.- VOL +/-: player volume controls. 6.- In player mode, a short press skips to the previous/next song. In FM mode, a short press skips to the previous/next station stored. 7.- ▶It in player mode, a short press plays/pauses audio playback. In FM mode, a short press automatically memorises all detected frequencies with sufficient signal quality. 8.- SCN: no function. 9.- RPT: in player mode, a short press selects the playback mode between: one track, all tracks or random playback. 10.- 0-9: in player mode, it allows the selection of the audio track to be played; in FM mode, it allows the selection of a station by its position in the memory.

CONNECTION

• Before connecting the power, make sure that the volume controls are at their minimum and the POWER switch is off.
• Connect the power supply cable to the mains.
• Connect a line level signal to the loudspeaker LINE IN input, from the output of a mixer, a CD player, etc.

You can also connect a USB storage device or SD memory card; or use the FM tuner. In this case, select the required audio source using the MP3/LINE IN selector.

• If you wish, dynamic microphones can be connected to INPUT 1, INPUT 2, INPUT 3 and INPUT 4.
• Switch the loudspeaker on using the POWER switch on the rear panel.
• Adjust the input volume to the required level using the corresponding controls.

- The loudspeaker output provides a line level that can be taken to another amplified loudspeaker, mixer, amplifier, recorder, etc.

- Furthermore, if you wish, a passive loudspeaker can be connected to the SPEAKER OUTPUT terminal.

- When not using the equipment, switch it off: turn the volume controls to minimum, deactivate it with the POWER switch and disconnect the power supply from the mains.

SB-3612 (ASB-12150U) SB-3615 (ASB-15180U)

WIRELESS CONNECTION OF 2 SPEAKERS

This speaker can be connected wirelessly to another speaker from the same series by following the steps described below:

1.- Turn on both speakers and select wireless mode. 2.- Long press the ☐ button until you hear a beep. This speaker will be the MASTER speaker and will play the left channel (L) of the stereo signal.

The other speaker will be the secondary speaker (SLAVE) and will play the right channel (R) of the stereo signal.

3.- Connect your wireless audio device to the MASTER speaker and you will hear another beep indicating that it has been successfully connected.

TECHNICAL SPECIFICATIONS

	ASB-12150U ASB-15180U
FEATURES	Active speaker with extra resistant injection box. USB/SD/FM player with remote control. Output for passive loudspeaker. Woofer protected by front metal grille. Carrying handles, suspension points, floor supports and monitor-shaped. Hole in the base for a 35 mm tube.
AMPLIFIER	360 W maximum, 180 W RMS Bass: 300 W maximum, 150 W RMS Treble: 60 W maximum, 30 W RMS	440 W maximum, 220 W RMS Bass: 380 W maximum, 190 W RMS Treble: 60 W maximum, 30 W RMS
PROTECTION	3 protection circuits: short circuit, overload and temperature
LOUDSPEAKERS	1x12" woofer: 50 mm voice coil and ferrite magnet 1 compression driver: 1 3/8" diaphragm	1 x 15" woofer: 63.5 mm voice coil and ferrite magnet 1 compression driver: 1 3/8" diaphragm
RESPONSE	50-18,000 Hz 42-18,000 Hz
INPUTS	3 balanced mics, XLR 1 balanced mic, combo (XLR and 6.3 mm jack) 1 auxiliary line, 2 x RCA
OUTPUTS	1 auxiliary line, 2 x RCA 1 amplified for passive loudspeaker, 8 Ω speaker connector
INDICATORS	Operation on the front and power, pico and bluetooth on the rear panel
CONTROLS	Input volume and overall volume Input selector: line/MP3 Player and FM radio control Effects: delay and echo 5-band graphic equalizer
SUSPENSION POINTS	4 points M8
POWER SUPPLY	230/115 V AC, 250 W 230/115 V AC, 350 W
DIMENSIONS	375 x 585 x 330 mm depth 460 x 685 x 380 mm depth

DESCRIPTION

SIMPLIFIED EU DECLARATION OF CONFORMITY

FONESTAR SISTEMAS S.A. hereby declares that the Active USB/SD/FM loudspeaker ASB-12150U complies with the Directive 2014/53/EU.

The complete text of the EU Declaration of Conformity is available at the following internet address:

fonestar.com/ASB-12150U

ES

fonestar.com/ASB-12150U

FR

SIMPLIFIED EU DECLARATION OF CONFORMITY

fonestar.com/ASB-12150U

PT

fonestar.com/ASB-12150U

www.fonestar.com