XWS-2510 - Network Equipment Luxul - Free user manual and instructions
Find the device manual for free XWS-2510 Luxul in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Network Switch |
| Brand | Luxul |
| Model | XWS-2510 |
| Dimensions (W x D x H) | 17.5 x 10.5 x 1.75 inches (44.5 x 26.7 x 4.4 cm) |
| Weight | 7.5 lbs (3.4 kg) |
| Power Supply | AC 100-240V, 50/60Hz, internal power supply |
| Number of Ports | 10 Gigabit Ethernet ports |
| PoE Support | Yes, PoE+ on all ports (total budget 150W) |
| Switching Capacity | 20 Gbps |
| Management | Web GUI, CLI, SNMP, VLAN, QoS, Link Aggregation |
| Cooling | Fanless design for silent operation |
| Mounting | Rack-mountable (1U), wall-mountable |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Safety Certifications | FCC, CE, RoHS |
| Maintenance | Keep clean and dry; avoid dust and moisture |
| Cleaning | Use a soft, dry cloth; do not use liquids |
| Spare Parts | No user-serviceable parts inside; contact support for replacements |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - XWS-2510 Luxul
How do I reset the XWS-2510 to factory defaults?
Locate the reset button on the front panel. Press and hold for 10 seconds using a paperclip until the system LED flashes. The switch will reboot with factory settings.
What is the default IP address and login?
The default IP is 192.168.1.1 with username admin and password admin. Change these immediately after initial setup.
Does the XWS-2510 support VLANs?
Yes, it supports 802.1Q VLAN tagging with up to 256 VLAN groups. You can configure them via the web interface.
How many PoE ports does it have?
All 10 ports support PoE+ (802.3at) with a total power budget of 150W. Each port can deliver up to 30W.
Can I mount this switch on a wall?
Yes, it comes with mounting brackets for both rack (1U) and wall mounting. Ensure proper ventilation.
How to update the firmware?
Download the latest firmware from Luxul's support site. Go to System > Firmware Upgrade in the web GUI and upload the file. Do not power off during upgrade.
What is the switching capacity?
The non-blocking switching capacity is 20 Gbps, sufficient for full line-rate throughput on all ports.
Is the switch fanless?
Yes, it features a fanless design for silent operation, ideal for office environments.
Does it support link aggregation?
Yes, it supports static and LACP (802.3ad) link aggregation for increased bandwidth and redundancy.
What maintenance is required?
Keep the switch free of dust and moisture. Use a soft dry cloth for cleaning. No internal maintenance is needed.
User questions about XWS-2510 Luxul
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network Equipment in PDF format for free! Find your manual XWS-2510 - Luxul and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XWS-2510 by Luxul.
USER MANUAL XWS-2510 Luxul
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Luxul
Model : XWS-2510
Category : Network Equipment