SQF-SLM 630 - SSD hard drive Advantech - Free user manual and instructions
Find the device manual for free SQF-SLM 630 Advantech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Solid State Drive (SSD) |
| Form Factor | 2.5-inch |
| Interface | SATA III (6 Gb/s) |
| Capacity | Up to 1 TB (varies by model) |
| NAND Flash Type | 3D TLC |
| Sequential Read Speed | Up to 560 MB/s |
| Sequential Write Speed | Up to 520 MB/s |
| Operating Temperature | 0°C to 70°C (standard) or -40°C to 85°C (industrial) |
| Dimensions (W x D x H) | 100.0 x 69.85 x 7.0 mm |
| Weight | Approx. 60 g |
| Power Consumption | Active: 2.0 W typical; Idle: 0.5 W |
| MTBF | 2,000,000 hours |
| Endurance | Up to 500 TBW (for 1 TB model) |
| Shock Resistance | 1500 G (half sine wave, 0.5 ms) |
| Vibration Resistance | 20 G (10-2000 Hz) |
| Security | Supports AES 256-bit encryption and TCG Opal 2.0 |
| Maintenance | No mechanical parts; firmware update via vendor tool |
| Cleaning | Use a dry cloth; avoid liquids and solvents |
| Spare Parts / Repairability | Non-user-serviceable; contact Advantech for warranty service |
| Certifications | CE, FCC, RoHS, REACH |
| Warranty | 3 years limited |
Frequently Asked Questions - SQF-SLM 630 Advantech
What is the SQF-SLM 630 SSD used for?
The SQF-SLM 630 is an industrial-grade solid-state drive designed for embedded systems, industrial PCs, and applications requiring high reliability and endurance.
What interface does the SQF-SLM 630 use?
It uses the SATA III interface (6 Gb/s), compatible with SATA I and II.
Is the SQF-SLM 630 compatible with standard 2.5-inch drive bays?
Yes, it has a standard 2.5-inch form factor with a thickness of 7 mm, fitting most laptops and desktop drive slots.
What are the operating temperature ranges?
The standard version operates from 0°C to 70°C. An industrial temperature range of -40°C to 85°C is also available for extreme environments.
Does the SQF-SLM 630 support encryption?
Yes, it supports AES 256-bit encryption and TCG Opal 2.0 for hardware-based data security.
How do I install the SQF-SLM 630?
Installation is straightforward: connect the SATA data cable and SATA power cable, then mount it in a 2.5-inch bay using the provided screws. No drivers are needed for basic operation.
Can I use this SSD in a RAID configuration?
Yes, it can be used in RAID 0, 1, 5, 10 and other configurations, provided your motherboard or RAID controller supports SATA drives.
What is the lifespan of the SQF-SLM 630?
The SSD has an MTBF of 2,000,000 hours and an endurance rating of up to 500 TBW for the 1 TB model, ensuring long-term reliability.
How should I clean the SSD?
Use a dry, lint-free cloth to wipe the external casing. Do not use liquids or solvents. For firmware updates, use the Advantech SSD Tool.
What should I do if the SSD fails?
Since the drive is non-serviceable, contact Advantech support or your distributor for warranty replacement. Do not attempt to open the unit.
User questions about SQF-SLM 630 Advantech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your SSD hard drive in PDF format for free! Find your manual SQF-SLM 630 - Advantech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SQF-SLM 630 by Advantech.
USER MANUAL SQF-SLM 630 Advantech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Advantech
Model : SQF-SLM 630
Category : SSD hard drive