Thrash212 GO - Loudspeaker MACKIE - Free user manual and instructions
Find the device manual for free Thrash212 GO MACKIE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable PA Speaker |
| Woofer Size | 12 inches |
| High-Frequency Driver | 1.75-inch compression driver |
| Power Rating (Peak) | 2000W |
| Power Rating (RMS) | 1000W |
| Frequency Response | 50 Hz - 20 kHz |
| Maximum SPL | 130 dB |
| Bluetooth Version | 5.0 |
| Built-in Mixer | 2-channel with volume controls |
| Inputs | XLR/TRS combo, 1/4-inch instrument, RCA |
| Outputs | XLR link out, headphone out |
| Battery Life | Up to 12 hours |
| Battery Type | Rechargeable lithium-ion |
| Dimensions (H x W x D) | 24.4 x 14.2 x 12.6 inches |
| Weight | 33.5 lbs (15.2 kg) |
| Material | Polypropylene cabinet with metal grille |
| Mounting Options | Pole mount, floor monitor |
| Included Accessories | Power cable, user manual |
| Warranty | 3 years limited |
Frequently Asked Questions - Thrash212 GO MACKIE
How do I pair my device via Bluetooth?
Enable Bluetooth on your device, press the Bluetooth button on the speaker (if available) or ensure the speaker is in pairing mode (LED flashes). Select 'Thrash212 GO' from your device's list. Once connected, the LED becomes solid.
Can I use the speaker while it is charging?
Yes, the Thrash212 GO can be used while connected to AC power. The battery will charge simultaneously.
What is the battery life?
The built-in rechargeable battery provides up to 12 hours of playback at moderate volume levels. Actual life varies with volume and usage.
How do I connect a microphone?
Connect your microphone to the XLR/TRS combo input on Channel 1 or 2. Adjust the volume using the corresponding channel control. Ensure phantom power is on if using a condenser mic (if supported).
What is the maximum SPL?
The speaker can reach a maximum SPL of 130 dB, making it suitable for small to medium venues.
Can I daisy-chain multiple speakers?
Yes, use the XLR link output to connect to another powered speaker. Only one speaker needs to be the Bluetooth source; the signal passes through.
How do I reset the speaker to factory settings?
To reset, press and hold the Bluetooth button for 10 seconds while the speaker is on. The LED will flash rapidly, then restart. All settings will revert to default.
What are the dimensions and weight?
The speaker measures 24.4 x 14.2 x 12.6 inches and weighs 33.5 lbs (15.2 kg).
Is the speaker water-resistant?
The Thrash212 GO is not rated as water-resistant. It should be kept away from moisture and rain. Use indoors or in protected outdoor areas.
How do I clean the speaker?
Clean the cabinet with a soft dry cloth. Do not use water or cleaning agents. Remove dust from the grille with a vacuum on low power.
User questions about Thrash212 GO MACKIE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Thrash212 GO - MACKIE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Thrash212 GO by MACKIE.
USER MANUAL Thrash212 GO MACKIE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MACKIE
Model : Thrash212 GO
Category : Loudspeaker