FR26L2 - Switch HAGER - Free user manual and instructions
Find the device manual for free FR26L2 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switch |
| Brand | Hager |
| Model | FR26L2 |
| Category | Electrical Switch |
| Dimensions (HxWxD) | 86 x 86 x 40 mm |
| Weight | 100 g |
| Rated Voltage | 230 V AC |
| Rated Current | 10 A |
| Material | Thermoplastic |
| Mounting Type | Flush mounting |
| Number of Poles | 1 |
| Switch Function | On/Off |
| Protection Rating | IP20 |
| Operating Temperature | -5 to 40 °C |
| Mechanical Life | 40,000 cycles |
| Electrical Life | 20,000 cycles |
| Connection Terminal | Screw terminals |
| Cable Cross Section | 1.5 to 2.5 mm² |
| Maintenance | Clean with dry cloth |
| Safety Standards | EN 60669-1 |
| Spare Parts | Not available |
| Reparability | Non-repairable by user |
Frequently Asked Questions - FR26L2 HAGER
How to install the Hager FR26L2 switch?
Installation must be carried out by a qualified electrician. Turn off the mains power, then connect the wires to the screw terminals according to the wiring diagram in the manual. Ensure the switch is flush-mounted in a standard wall box.
What tools are needed for installation?
You will need a screwdriver (for terminal screws), a voltage tester, and possibly a wire stripper for preparing cables. Also a spirit level to ensure the switch is mounted straight.
Is the FR26L2 compatible with dimmer switches?
No, the FR26L2 is a standard on/off switch and is not designed for dimming. For dimming functions, you need a dedicated dimmer module that matches your lighting load.
Can the FR26L2 be used outdoors?
No, it has an IP20 rating, meaning it is only suitable for indoor use in dry environments. For outdoor use, consider switches with IP44 or higher.
What is the warranty period for Hager switches?
Hager typically offers a 2-year warranty on their switches from the purchase date. Keep your receipt as proof of purchase for any claims.
Can I use the FR26L2 with LED lights?
Yes, it is compatible with LED lighting as long as the total load does not exceed the rated current of 10 A. For very low loads, ensure the switch's minimum load is met to prevent flickering.
How to wire the FR26L2 switch?
Connect the live wire to the common terminal (marked L or COM), and the switched live to the other terminal. The earth wire (if present) should be connected to the earth terminal. Always follow local wiring regulations.
Is the FR26L2 child-safe?
The switch has no specific child-safety lock, but its design complies with safety standards. For additional protection, consider using socket safety covers if needed.
Does the FR26L2 have a neon indicator?
No, the FR26L2 is a standard switch without a neon or LED indicator. If you need a switch with an indicator, look for models specifically designed with that feature.
Where can I buy spare parts for the FR26L2?
Spare parts are not available separately for this switch model. If the switch is defective, it is recommended to replace the entire unit with an identical model from Hager.
User questions about FR26L2 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual FR26L2 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FR26L2 by HAGER.
USER MANUAL FR26L2 HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : FR26L2
Category : Switch