25-210H - Plane RIKON - Free user manual and instructions
Find the device manual for free 25-210H RIKON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Benchtop Jointer-Planer Combination |
| Brand | RIKON |
| Model | 25-210H |
| Cutting Width | 12 inches (305 mm) |
| Maximum Depth of Cut (Planer) | 1/8 inch (3.2 mm) |
| Maximum Depth of Cut (Jointer) | 1/16 inch (1.6 mm) |
| Table Length | 39 inches (991 mm) |
| Motor Power | 1 HP (15 A, 120 V) |
| Spindle Speed | 10,000 RPM |
| Number of Knives | 3 (Reversible) |
| Dust Port Diameter | 2.5 inches (64 mm) |
| Weight | 99 lbs (45 kg) |
| Overall Dimensions (L x W x H) | 32 x 15 x 18 inches (813 x 381 x 457 mm) |
| Fence Tilt | 45 degrees left, 45 degrees right |
| Power Supply | 120V, 60Hz, 15A |
| Key Features | Quick change knife system, built-in dust collection, solid cast iron tables |
| Maintenance | Regular lubrication of moving parts, blade sharpening/replacement, table cleaning |
| Safety Devices | Blade guard, push block, emergency stop switch |
| Spare Parts Availability | Rikon parts online or authorized dealers |
Frequently Asked Questions - 25-210H RIKON
What is the maximum width of material I can plane with the RIKON 25-210H?
The RIKON 25-210H can plane material up to 12 inches wide.
How do I change the blades on the RIKON 25-210H?
The RIKON 25-210H features a quick change knife system. Refer to the manual for detailed steps, but generally you loosen the screws holding the blade in place, remove the old blade, insert the new one, and tighten securely. Ensure blades are aligned properly.
What is the recommended speed for planing?
Feed rate should be steady and not forced. Typically, 10-15 feet per minute is recommended for optimal finish. Avoid stopping mid-cut.
Can I use the RIKON 25-210H as a jointer?
Yes, the RIKON 25-210H is a combination jointer-planer. It can be used to joint edges and flatten faces, then switch to planing mode for thicknessing.
How do I adjust the depth of cut?
The depth of cut is adjusted using the hand wheel on the machine. For planing, turn the wheel to raise or lower the cutterhead. For jointing, adjust the infeed table height. Always make shallow passes (max 1/8 inch).
What type of dust collection does the 25-210H require?
The machine has a 2.5-inch dust port. A shop vacuum or dust collector with a 2.5-inch hose or adapter is recommended for effective dust removal.
How often should I lubricate the machine?
Lubricate moving parts such as the table elevation screws and fence pivots every 20 hours of use or monthly. Use a light machine oil.
What safety equipment should I use with this plane?
Always wear safety glasses, hearing protection, and a dust mask. Use the provided blade guard and push blocks. Do not wear loose clothing or jewelry.
Why is my wood coming out with a rough finish?
A rough finish can be caused by dull blades, too deep a cut, or feed rate too fast. Check blade sharpness, reduce depth of cut, and slow feed rate.
Where can I find spare parts or accessories for the RIKON 25-210H?
Spare parts and accessories are available from Rikon's official website or authorized dealers. Common replacements include blades, belts, and dust port adapters.
User questions about 25-210H RIKON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Plane in PDF format for free! Find your manual 25-210H - RIKON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 25-210H by RIKON.
USER MANUAL 25-210H RIKON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RIKON
Model : 25-210H
Category : Plane