70-1218VS - Uncategorized RIKON - Free user manual and instructions
Find the device manual for free 70-1218VS RIKON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Variable Speed Band Saw |
| Model Number | 70-1218VS |
| Brand | RIKON |
| Motor Power | 1 HP (745 W) |
| Variable Speed Range | 400 - 1800 FPM |
| Blade Length | 105 inches (2670 mm) |
| Blade Width | Up to 3/4 inch (19 mm) |
| Cutting Height (Throat) | 12 inches (305 mm) |
| Table Size | 15 x 18 inches (380 x 460 mm) |
| Table Tilt | 0° to 45° |
| Dust Port Diameter | 4 inches (102 mm) |
| Weight | 180 lbs (81.6 kg) |
| Dimensions (L x W x H) | 40 x 25 x 50 inches (1016 x 635 x 1270 mm) |
| Voltage / Frequency | 120 V / 60 Hz |
| Amperage | 10 A |
| Certification | ETL Listed |
| Warranty | 5 Years Limited Warranty |
Frequently Asked Questions - 70-1218VS RIKON
What is the recommended blade for general cutting?
For general wood cutting, use a 3/8 inch (10 mm) 6 TPI (teeth per inch) blade. Adjust speed to match material hardness.
How do I adjust the blade tension?
Loosen the blade guide assembly, turn the tension knob clockwise until the blade is snug, then tighten the locking knob. Refer to the manual for specific tension settings.
How often should I lubricate the machine?
Lubricate the blade guides and thrust bearings every 20 hours of operation or monthly with lightweight machine oil. Avoid over-lubrication.
Can I use this band saw for metal cutting?
Yes, with appropriate metal-cutting blades and a slower speed setting. Use coolant if recommended. Do not cut hardened steel or non-ferrous metals unless specified.
What safety precautions should I follow?
Always wear safety glasses, keep hands clear of the blade, use push sticks for small pieces, and ensure the machine is properly grounded. Disconnect power before maintenance.
How do I change the blade?
Unplug the saw, remove the table insert, loosen the blade tension knob, slip the old blade off the wheels, fit the new blade with teeth pointing down, and retighten tension. Align the blade on the wheel tires.
What is the maximum cutting width?
The maximum cutting width (right of blade) is 12 inches (305 mm) due to the throat depth. For wider cuts, use a large bandsaw or resaw.
How do I adjust the table tilt?
Loosen the two tilt lock knobs under the table, tilt the table to the desired angle (0° to 45°), and retighten the knobs. Use a protractor or angle gauge for accuracy.
What maintenance is required?
Regularly clean sawdust from the table and blade guides, check blade condition, lubricate bearings, inspect belts for wear, and tighten mounting bolts. Perform a full inspection every 50 hours.
Where can I find replacement parts?
Contact RIKON customer service or visit your authorized dealer. Use genuine RIKON parts for safety and performance. Part numbers are listed in the user manual.
User questions about 70-1218VS RIKON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 70-1218VS - RIKON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 70-1218VS by RIKON.
USER MANUAL 70-1218VS RIKON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RIKON
Model : 70-1218VS
Category : Uncategorized