CI 8-120 DSP V2 - Receiver NAD - Free user manual and instructions
Find the device manual for free CI 8-120 DSP V2 NAD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multichannel Power Amplifier/Receiver |
| Brand | NAD |
| Model | CI 8-120 DSP V2 |
| Number of Channels | 8 |
| Power Output per Channel | 120W into 8 ohms (all channels driven) |
| Frequency Response | 20 Hz - 20 kHz (±0.1 dB) |
| Total Harmonic Distortion (THD) | < 0.05% at rated power |
| Input Impedance | 47 kΩ (unbalanced), 47 kΩ (balanced) |
| Signal-to-Noise Ratio | > 110 dB (A-weighted) |
| Dimensions (W x H x D) | 435 mm x 100 mm x 350 mm |
| Weight | 12 kg |
| Power Consumption | 800 W maximum, < 0.5 W standby |
| Inputs | 8 x RCA (unbalanced), 8 x XLR (balanced) |
| Outputs | 8 x Binding posts (speaker) |
| DSP Features | Dirac Live® room correction, crossover, EQ, delay |
| Cooling | Variable-speed fan, thermally managed |
| Operating Temperature | 0 °C to 40 °C |
| Safety Features | Overcurrent, overvoltage, thermal protection, DC offset protection |
| Maintenance and Cleaning | Wipe with a soft, dry cloth; do not use liquids or abrasives |
| Spare Parts and Repairability | Modular design; contact NAD service for parts |
Frequently Asked Questions - CI 8-120 DSP V2 NAD
How do I connect the NAD CI 8-120 DSP V2 to my audio source?
Use either balanced XLR or unbalanced RCA inputs. Ensure the source output matches the input type. For best noise rejection, use balanced connections.
Can I bridge channels for more power?
The CI 8-120 DSP V2 does not support bridging. Each channel delivers 120W into 8 ohms independently.
How do I set up Dirac Live room correction?
Download the Dirac Live software, connect the amplifier via USB, and follow the on-screen measurement process using the supplied microphone.
What is the trigger voltage for 12V trigger input?
The 12V trigger accepts 3-24V DC. Use a mono 3.5mm jack for connection.
How do I update firmware?
Connect the amplifier to your network via Ethernet, then use the web interface (default IP from router) to check and apply updates.
Why is no sound coming from my speakers?
Check that the amplifier is powered on and not in standby, confirm input connections, verify the source is playing, and ensure speaker wires are secure.
What impedance speakers can I use?
The amplifier is rated for 4-8 ohm speakers. Using lower impedance may cause overheating.
Is the CI 8-120 DSP V2 rack-mountable?
Yes, it has standard 19-inch rack ears and is 2U high (100mm).”
How do I reset the amplifier to factory defaults?
Press and hold the front panel power button for 10 seconds until the LED flashes rapidly. Release; all settings will be cleared.
What is the warranty period?
NAD offers a 2-year warranty from the date of purchase for parts and labor.
User questions about CI 8-120 DSP V2 NAD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual CI 8-120 DSP V2 - NAD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CI 8-120 DSP V2 by NAD.
USER MANUAL CI 8-120 DSP V2 NAD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NAD
Model : CI 8-120 DSP V2
Category : Receiver