M23 V2 - Receiver NAD - Free user manual and instructions
Find the device manual for free M23 V2 NAD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | NAD |
| Model | M23 V2 |
| Dimensions (W x H x D) | 435 mm x 120 mm x 337 mm |
| Weight | 10.2 kg |
| Power Output (8 ohms) | 80 W per channel, 20 Hz – 20 kHz |
| Power Output (4 ohms) | 150 W per channel |
| Total Harmonic Distortion | < 0.02 % |
| Frequency Response | 20 Hz – 20 kHz ± 0.1 dB |
| Signal-to-Noise Ratio | > 98 dB (A-weighted) |
| Input Sensitivity (Line) | 200 mV |
| Input Impedance | 47 kΩ |
| Audio Inputs | 5 RCA line inputs, 1 Phono (MM), 1 coaxial digital, 1 optical digital |
| Audio Outputs | Speaker A/B, Pre-out, Subwoofer out, Headphone jack |
| Tuner | AM/FM with RDS |
| Bluetooth | Yes, aptX HD |
| Power Consumption | 300 W (max), < 0.5 W standby |
| Power Supply | AC 120 V / 230 V, 50/60 Hz (switchable) |
| Safety Certifications | CE, FCC, RoHS |
| Cleaning Instructions | Use a soft, dry cloth. Do not use liquids or aerosol cleaners. |
| Maintenance | Disconnect power before cleaning. Ensure adequate ventilation. |
| Spare Parts and Reparability | Contact authorized NAD service center. Refer to manual for part numbers. |
Frequently Asked Questions - M23 V2 NAD
How do I connect speakers to the NAD M23 V2?
Use high-quality speaker cables. Connect the positive terminal of the receiver to the positive terminal of the speaker, and negative to negative. Ensure the receiver is turned off while connecting.
What is the power output of the M23 V2?
The NAD M23 V2 delivers 80 watts per channel into 8 ohms and 150 watts per channel into 4 ohms, with low distortion.
Does the M23 V2 have a built-in phono preamp?
Yes, the M23 V2 includes a dedicated moving magnet (MM) phono input for turntables.
How do I set up the AM/FM tuner?
Connect the included antenna. Press the 'Tuner' button on the remote or front panel. Use the tuning knob or remote to search for stations. Save presets by pressing the 'Memory' button.
Can I use Bluetooth with the M23 V2?
Yes, the M23 V2 supports Bluetooth aptX HD for high-quality wireless streaming. Pair your device by enabling Bluetooth and selecting 'NAD M23 V2'.
How do I reset the M23 V2 to factory settings?
Turn off the unit. Press and hold the 'Power' button for 10 seconds until the display flashes. Release; the unit will reset.
What is the recommended ventilation for the receiver?
Place the receiver on a stable surface with at least 10 cm (4 inches) of clearance above and around for proper airflow. Do not block the ventilation slots.
How do I clean the M23 V2?
Disconnect the power. Use a soft, dry cloth to gently wipe the exterior. Do not use alcohol, solvents, or abrasive cleaners.
What should I do if the receiver doesn't turn on?
Check the power cord is securely connected. Ensure the power outlet is active. If using a power strip, confirm it is on. If the issue persists, contact NAD support.
Where can I find spare parts or get repairs?
Visit the NAD website or contact your local authorized NAD service center. Refer to the manual for specific part numbers. Do not attempt to disassemble the unit yourself.
User questions about M23 V2 NAD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual M23 V2 - NAD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M23 V2 by NAD.
USER MANUAL M23 V2 NAD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NAD
Model : M23 V2
Category : Receiver