MD20EH100WB-A3 - Tumble dryer MIDEA - Free user manual and instructions
Find the device manual for free MD20EH100WB-A3 MIDEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vented Tumble Dryer |
| Brand | Midea |
| Model | MD20EH100WB-A3 |
| Capacity | 8 kg |
| Dimensions (W x D x H) | 600 x 580 x 850 mm |
| Weight | 40 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Rated Power | 2000 W |
| Energy Efficiency Class | A++ |
| Drying Programs | Cotton, Synthetics, Delicates, Time Drying, Anti-Wrinkle, Cool Air |
| Temperature Settings | High, Low, No Heat |
| Drum Material | Stainless Steel |
| Lint Filter | Removable, clean after each cycle |
| Condenser Unit | Not applicable (vented type) |
| Child Lock | Yes |
| Overheating Protection | Yes, automatic shutdown |
| Delay Start | Up to 24 hours |
| Drying Level Sensor | Automatic moisture sensing |
| Noise Level | 65 dB(A) |
| Venting Hose Diameter | 100 mm |
| Maintenance | Clean lint filter after each cycle; check venting hose monthly |
| Spare Parts Available | Drum belt, door seal, heating element, thermostat, control board |
| Repairability Index | 7.5 / 10 |
Frequently Asked Questions - MD20EH100WB-A3 MIDEA
How do I clean the lint filter on my Midea MD20EH100WB-A3 dryer?
Open the door and pull the lint filter located at the bottom of the door opening. Remove lint by hand or with a soft brush, rinse under water if needed, dry thoroughly, and slide back in. Clean after every cycle for efficiency.
What should I do if the dryer stops before the cycle ends?
Check if the water tank (if condenser) or venting hose (if vented) is blocked. Also inspect the lint filter and ensure the load is not too large. Reset the dryer by unplugging for 5 minutes.
Can I install the dryer in a small closet?
Yes, but ensure adequate ventilation. The venting hose must lead outside. Maintain at least 5 cm clearance on sides and back to prevent overheating.
How do I use the delay start feature?
Select your drying program, then press the Delay Start button repeatedly to set hours (1-24). The display shows the delay time. Press Start and the dryer will begin after the set time.
What does the 'Anti-Wrinkle' program do?
After drying, the drum rotates periodically for up to 2 hours without heat to prevent creases. You can remove clothes anytime during this phase.
Why is my laundry still damp after a cycle?
Check if the load is too large or the lint filter is clogged. Also verify the selected program matches the fabric type. For cottons, use the 'Cotton' program with high heat.
How often should I replace the door seal?
If you notice air leaks, condensation around the door, or drying time increases, inspect the seal. Replace it every 2-3 years or when damaged. Genuine Midea seals are recommended.
Can I dry shoes on the MD20EH100WB-A3?
Yes, use the Time Drying program with low heat. Place shoes on a drying rack (sold separately) or inside a mesh bag. Do not overload.
What is the maximum weight of clothes I can dry?
The dryer has a 8 kg capacity. Do not exceed this to ensure efficient drying and prevent damage. For bulky items like duvets, reduce load by half.
How do I activate the child lock?
Press and hold the Child Lock button (usually marked with a padlock icon) for 3 seconds until the indicator lights up. Repeat to disable. This prevents accidental button presses during operation.
User questions about MD20EH100WB-A3 MIDEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual MD20EH100WB-A3 - MIDEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MD20EH100WB-A3 by MIDEA.
USER MANUAL MD20EH100WB-A3 MIDEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MIDEA
Model : MD20EH100WB-A3
Category : Tumble dryer