MDK888HP - Tumble dryer MIDEA - Free user manual and instructions
Find the device manual for free MDK888HP MIDEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Midea |
| Model | MDK888HP |
| Capacity | 8 kg |
| Drying Type | Heat Pump |
| Energy Efficiency Class | A++ |
| Dimensions (H x W x D) | 850 mm x 596 mm x 636 mm |
| Net Weight | 44 kg |
| Power Supply | 220-240 V, 50 Hz |
| Rated Power | 850 W |
| Drum Volume | 118 L |
| Number of Programs | 15 |
| Special Programs | Cotton, Synthetics, Mixed, Delicates, Wool, Shirts, Jeans, Sportswear, Bedding, Quick 30 min, Eco, Refresh, Anti-Allergy, Timed Drying, Air Fluff |
| Additional Functions | Delay Start (1-24h), Child Lock, Anti-Crease, Drying Level Adjustment, Silent Mode |
| Lint Filter | Removable, easy-clean mesh filter |
| Condenser Cleaning | Manual clean with brush |
| Water Tank | 4.5 L capacity, empty after each cycle |
| Noise Level | 65 dB(A) |
| Control Type | Electronic touch control with LED display |
| Installation Type | Freestanding |
| Door Reversible | Yes |
| Color | White |
| Spare Parts Availability | Filters, belts, heating elements, door seals, control boards available for 10 years |
| Repairability Index | 8.2/10 |
Frequently Asked Questions - MDK888HP MIDEA
How do I clean the lint filter on my Midea MDK888HP?
Clean the lint filter after every cycle. Open the door, pull the filter located at the bottom of the door opening, remove lint with your hand or a soft brush, rinse under running water if needed, dry thoroughly, and reinsert.
What should I do if the dryer displays an error code?
If an error code appears, unplug the dryer for 10 minutes and restart. Common codes: E1 (water tank full), E2 (clogged filter), E3 (drum belt issue). Consult the manual for full list. If persists, contact Midea service.
What is the maximum load capacity?
The maximum dry load is 8 kg for cotton programs. For synthetics and delicates, reduce to 4 kg and 2 kg respectively. Overloading can affect drying performance and cause damage.
How do I empty the water tank?
The water tank is located at the top left. Pull it out gently, pour the water down a drain, reinsert until it clicks. Empty after each cycle or when the indicator lights up.
Can I install the dryer in a cold room?
Yes, but the ambient temperature should be between 5°C and 35°C. Below 5°C, the heat pump may not work efficiently. Avoid freezing conditions to prevent water in the tank from freezing.
How often should I clean the condenser?
Clean the condenser every 3 months or after 30 cycles. Remove the lower front panel, pull out the condenser unit, rinse with water, brush gently, dry, and replace.
Does the dryer have a child lock?
Yes, press and hold the Child Lock button for 3 seconds to activate. The lock symbol appears on the display. Repeat to deactivate. This prevents children from changing settings.
What is the energy consumption per cycle?
For a standard cotton dry cycle at full load, the energy consumption is approximately 2.1 kWh. The Energy Efficiency Class is A++, meaning low energy usage.
Can I stop the cycle early?
Yes, press the Start/Pause button to pause the cycle, then open the door to remove laundry. Note that the drum may be hot. To resume, close the door and press Start/Pause again.
How do I select a different drying program?
Turn the program dial to the desired program (e.g., Cotton, Synthetics, Quick 30). The display shows estimated time. You can adjust options like drying level or delay start before pressing Start.
User questions about MDK888HP MIDEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual MDK888HP - MIDEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MDK888HP by MIDEA.