EAP300PM2.5HC - Air purifier ElectriQ - Free user manual and instructions
Find the device manual for free EAP300PM2.5HC ElectriQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Purifier |
| Model | EAP300PM2.5HC |
| Dimensions (W x D x H) | 300 x 300 x 520 mm |
| Weight | 5.2 kg |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption | 45 W (max) |
| Coverage Area | Up to 30 m² |
| CADR (Dust) | 200 m³/h |
| Filtration Stages | Pre-filter, HEPA H13, Activated Carbon |
| PM2.5 Sensor | Yes, real-time display |
| Noise Level | 25 – 50 dB(A) |
| Fan Speeds | 3 speeds + Auto mode |
| Timer | 1-8 hours |
| Filter Replacement Indicator | Yes |
| Sleep Mode | Yes, with dimmed lights |
| Child Lock | Yes |
| Air Quality Display | Color-coded LED ring |
| Filter Type | Replacement filter: EF300HC |
| Maintenance | Pre-filter washable every 2 weeks, HEPA filter replace every 6-12 months |
| Safety Features | Overheat protection, tip-over switch |
| Accessories Included | Power cable, user manual |
Frequently Asked Questions - EAP300PM2.5HC ElectriQ
How often should I replace the filters?
The HEPA and activated carbon filters should be replaced every 6-12 months depending on usage and air quality. The pre-filter can be vacuumed or washed every 2 weeks.
How do I clean the pre-filter?
Remove the pre-filter from the back of the unit. Vacuum it gently or wash it with warm water and mild detergent. Allow it to dry completely before reinstalling.
What does the PM2.5 sensor reading mean?
The sensor measures the concentration of fine particulate matter in the air (PM2.5). A reading below 35 µg/m³ is considered good, above 75 µg/m³ is unhealthy.
How do I reset the filter replacement indicator?
After replacing the filter, press and hold the Filter Reset button (usually on the control panel) for 3 seconds until the indicator light turns off.
Can I use the purifier in a room with pets?
Yes, the purifier is effective at capturing pet dander and odors. Clean the pre-filter more frequently if you have pets.
Is the purifier safe to leave on 24/7?
Yes, the purifier is designed for continuous operation. It has overheat protection and auto shut-off features for safety.
Why is the air quality light red even after cleaning the filter?
The red light indicates poor air quality. Ensure the room is well-ventilated and the purifier is in Auto mode. If the issue persists, check if the HEPA filter needs replacement.
What is the recommended room size for this purifier?
The purifier is suitable for rooms up to 30 m² (approximately 320 sq ft) for effective air cleaning.
How do I use the timer function?
Press the Timer button repeatedly to set the desired operation time from 1 to 8 hours. The purifier will automatically turn off after the set time.
What should I do if the purifier makes unusual noise?
Check if the pre-filter is properly installed and clean. Ensure there are no foreign objects blocking the air intake or outlet. If noise persists, contact customer support.
User questions about EAP300PM2.5HC ElectriQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air purifier in PDF format for free! Find your manual EAP300PM2.5HC - ElectriQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EAP300PM2.5HC by ElectriQ.
USER MANUAL EAP300PM2.5HC ElectriQ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ElectriQ
Model : EAP300PM2.5HC
Category : Air purifier