57341 - Saw Draper - Free user manual and instructions
Find the device manual for free 57341 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Draper |
| Model | 57341 |
| Power Supply | 240 V ~ 50 Hz |
| Power Consumption | 1200 W |
| Blade Diameter | 185 mm |
| Blade Bore | 20 mm |
| Max Cut Depth at 90° | 65 mm |
| Max Cut Depth at 45° | 42 mm |
| No Load Speed | 5000 rpm |
| Weight | 4.5 kg |
| Dimensions (L x W x H) | 300 x 200 x 250 mm |
| Main Functions | Rip cuts, cross cuts, bevel cuts up to 45° |
| Safety Features | Blade guard, spindle lock, safety switch |
| Maintenance | Clean after use, check carbon brushes periodically, lubricate moving parts |
| Spare Parts Availability | Replacement blades, carbon brushes, and guide rails available |
| Repairability | User-serviceable: carbon brushes and blade replacement; professional for motor issues |
| Included Accessories | 1x 185mm saw blade, 1x rip fence, 1x hex key |
| Usage Environment | Indoor/outdoor, dry conditions; not for wet cutting |
| Warranty | 2 years (subject to terms) |
| Certification | CE, UKCA |
Frequently Asked Questions - 57341 Draper
How do I change the blade on my Draper 57341 saw?
Unplug the saw. Press the spindle lock to hold the blade. Use the provided hex key to loosen the blade bolt. Remove the bolt and outer flange. Replace the blade, ensuring the teeth face the correct direction. Reassemble and tighten the bolt securely.
What is the maximum cutting depth of this saw?
The maximum cut depth at 90° is 65 mm. At a 45° bevel, the maximum depth is 42 mm.
Can I use this saw for metal cutting?
No, the Draper 57341 is designed for wood and wood-based materials only. Using it on metal may damage the blade and void the warranty.
How do I adjust the bevel angle?
Loosen the bevel adjustment knob located at the base of the saw. Tilt the base to the desired angle (0-45°). Tighten the knob securely before cutting.
What maintenance does this saw require?
Regularly clean dust from vents and blade guard. Check carbon brushes every 50 hours of use; replace if worn. Lubricate pivot points with light oil. Keep blade sharp.
Is the blade guard removable?
The blade guard should never be removed. It is a safety feature that protects the user. If the guard is stuck, clean it and ensure it retracts properly.
Why does the saw stop suddenly?
Possible causes: overload (let saw cool), worn carbon brushes, or power cord damage. Check brushes first. If problem persists, consult a qualified technician.
What type of extension cord should I use?
Use a properly rated extension cord (minimum 1.5 mm² cross-section) suitable for outdoor use if cutting outside. Keep the cord away from the cutting path.
Can I cut materials thicker than 65 mm?
No, the saw's maximum depth of cut at 90° is 65 mm. Attempting to cut thicker stock may cause kickback or motor damage.
Where can I find replacement parts?
Replacement parts (blades, brushes, etc.) are available through Draper's website or authorized dealers. Use only genuine Draper parts for safety and performance.
User questions about 57341 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual 57341 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 57341 by Draper.
USER MANUAL 57341 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 57341
Category : Saw