90170 - Saw Draper - Free user manual and instructions
Find the device manual for free 90170 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Saw |
| Brand | Draper |
| Model | 90170 |
| Dimensions (L x W x H) | 45 cm x 30 cm x 25 cm |
| Weight | 5.2 kg |
| Power Source | Corded electric |
| Power Rating | 1800 W |
| Blade Diameter | 190 mm |
| Arbor Size | 20 mm |
| Max Cutting Depth at 90° | 65 mm |
| Max Cutting Depth at 45° | 45 mm |
| Bevel Capacity | 0° - 45° |
| No-Load Speed | 5000 RPM |
| Safety Features | Blade guard, spindle lock, safety switch |
| Maintenance | Clean after each use, lubricate moving parts, check carbon brushes regularly |
| Spare Parts | Blade, carbon brushes, power cord, saw shoe |
| Certifications | CE, RoHS |
Frequently Asked Questions - 90170 Draper
How do I change the blade on my Draper 90170 saw?
First, unplug the saw. Use the spindle lock to hold the blade in place, then loosen the arbor nut with the wrench provided. Remove the outer flange and old blade. Install the new blade with teeth facing forward, then reassemble the flange and nut, tightening securely.
What is the correct way to adjust the cutting depth?
Loosen the depth adjustment lever located near the base. Set the desired depth by moving the base up or down, ensuring the blade extends slightly below the material thickness for a clean cut. Retighten the lever firmly.
How can I ensure safe operation?
Always wear safety goggles and hearing protection. Keep hands away from the blade, use a push stick for small pieces, and never force the saw. Ensure the blade guard is working properly before each use.
What maintenance is required?
Regularly clean the saw with a dry cloth to remove dust. Lubricate moving parts with light machine oil. Check carbon brushes every 50 hours of use and replace if worn. Inspect the power cord for damage.
Where can I purchase spare parts?
Spare parts such as blades, carbon brushes, and power cords can be purchased from Draper authorized dealers or online through the official Draper website. Always use genuine parts for safety.
My saw is not starting, what should I check?
First, ensure the power cord is plugged in and the outlet has power. Check if the safety switch is engaged. Inspect the carbon brushes for wear and replace if necessary. If the problem persists, consult a qualified technician.
How do I make bevel cuts?
Loosen the bevel adjustment knob at the front of the base. Tilt the base to the desired angle (0-45°), aligning with the scale. Tighten the knob and make the cut slowly. Always ensure the blade is not binding.
Can I use different blade sizes?
This saw is designed for 190 mm blades with a 20 mm arbor. Using other sizes may cause instability or damage. Always use blades that match the specifications in the manual.
What is the recommended blade for cutting wood?
For wood cutting, use a carbide-tipped blade with 24 to 40 teeth. A finer tooth count gives smoother cuts, while a coarse tooth count is better for fast ripping.
How do I clean the saw?
Unplug the saw and wipe the exterior with a damp cloth. Use compressed air to blow dust from the motor vents and blade guard. Never immerse in water. For stubborn resin on the blade, use a specialized cleaner.
User questions about 90170 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual 90170 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 90170 by Draper.
USER MANUAL 90170 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 90170
Category : Saw