Vision VS1100P - Speaker ESX - Free user manual and instructions
Find the device manual for free Vision VS1100P ESX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Coaxial Speaker (2-way) |
| Model | Vision VS1100P |
| Brand | ESX |
| Dimensions | Approx. 6.5" (165 mm) diameter, 2.5" (64 mm) mounting depth |
| Weight | Approx. 1.2 kg (2.65 lbs) per speaker |
| Power Handling (RMS) | 60 Watts RMS per channel |
| Power Handling (Peak) | 180 Watts peak per channel |
| Impedance | 4 Ohms |
| Sensitivity | 89 dB (1W/1m) |
| Frequency Response | 50 Hz – 20 kHz |
| Voice Coil | High-temperature aluminum |
| Magnet Material | Ferrite |
| Cone Material | Polypropylene with rubber surround |
| Tweeter Type | Piezo or mylar dome (typical) |
| Mounting Hardware | Included (grille, screws, wire connectors) |
| Protection | Polypropylene cone with UV-resistant coating |
| Cleaning Instructions | Wipe with a soft, dry cloth; avoid liquids and abrasives |
| Safety Notes | Disconnect power before installation; ensure proper polarity; avoid short circuits |
| Spare Parts | Replacement grilles and wire connectors available; no user-serviceable parts inside |
| Reparability | Not designed for user repair; contact ESX service center |
| General Information | ESX Vision VS1100P is a 6.5-inch 2-way coaxial speaker designed for car audio systems, offering balanced sound and easy installation. |
Frequently Asked Questions - Vision VS1100P ESX
What are the dimensions of the ESX Vision VS1100P speaker?
The speaker has a diameter of approximately 6.5 inches (165 mm) and a mounting depth of about 2.5 inches (64 mm). Always verify fitment for your vehicle.
What is the power handling of this speaker?
The RMS power handling is 60 Watts per channel, with a peak power handling of 180 Watts. It is recommended to use an amplifier that matches these specs.
What is the impedance of the Vision VS1100P?
The speaker has an impedance of 4 Ohms, which is standard for most car audio systems.
How do I clean the speaker?
Clean the speaker grill and cone with a soft, dry cloth. Do not use water, solvents, or abrasive materials. Keep the speaker dry to avoid damage.
Can I use this speaker in a home theater system?
These speakers are designed for car audio use. While they can work in home applications with a suitable amplifier, they are optimized for vehicle environments.
Does the speaker come with a warranty?
ESX typically offers a warranty of 1-2 years from date of purchase. Check with your retailer or ESX customer support for specific terms.
What type of tweeter does the Vision VS1100P use?
It features a piezo or mylar dome tweeter for clear high-frequency response. The exact type may vary by production batch.
How do I install the speaker?
Disconnect the car battery, mount the speaker in a 6.5-inch cutout, connect positive and negative terminals correctly, and secure with included screws. Refer to the manual for detailed steps.
Is the speaker magnet large?
The speaker uses a ferrite magnet of moderate size, providing a balance between performance and weight. It may not fit in very shallow mounting locations.
Can I replace the speaker grille?
Yes, replacement grilles are available as spare parts. Contact ESX or an authorized dealer for compatible grilles.
User questions about Vision VS1100P ESX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Vision VS1100P - ESX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vision VS1100P by ESX.
USER MANUAL Vision VS1100P ESX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ESX
Model : Vision VS1100P
Category : Speaker