Vigor167 - Router Draytek - Free user manual and instructions
Find the device manual for free Vigor167 Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | VDSL2/ADSL2+ Modem Router |
| Dimensions | 210 x 150 x 35 mm (8.27 x 5.91 x 1.38 inches) |
| Weight | 300 g (0.66 lbs) |
| Power Supply | DC 12V, 1.5A |
| Ethernet Ports | 4 x Gigabit LAN ports |
| DSL Port | 1 x VDSL2/ADSL2+ (RJ-11) |
| USB Port | 1 x USB 2.0 (for storage or 3G/4G dongle) |
| Wireless | None (wired router) |
| Firewall | Stateful Packet Inspection (SPI), DoS prevention |
| VPN Support | PPTP, L2TP, IPSec pass-through |
| QoS | Bandwidth management and traffic prioritization |
| Management | Web-based interface, CLI, TR-069 |
| LED Indicators | Power, DSL, Ethernet, USB, Status |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -25°C to 70°C (-13°F to 158°F) |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with a soft dry cloth; avoid liquids and abrasive cleaners |
| Safety | Keep away from water and heat sources; unplug during lightning storms |
| Spare Parts | Power adapter (12V/1.5A), Ethernet cables, RJ-11 cable |
| Repairability | No user-serviceable parts; contact support for issues |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - Vigor167 Draytek
How do I reset the Draytek Vigor167 to factory defaults?
Locate the reset button on the back panel. Use a paperclip to press and hold it for 10 seconds while the device is powered on. Release when the LED indicators flash. The router will reboot with default settings.
What is the default IP address for the Vigor167?
The default IP address is 192.168.1.1. Username and password are both admin (case-sensitive).
How can I update the firmware on my Vigor167?
Download the latest firmware from Draytek's official website. Log into the web interface (192.168.1.1), go to System Maintenance > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
How do I set up a VPN connection on the Vigor167?
Go to VPN and Remote Access > LAN to LAN or Remote Access. Choose protocol (PPTP, L2TP, or IPSec). Configure the remote gateway, authentication, and IP pools. Apply settings.
Why is my DSL connection not syncing?
Check the DSL cable connection. Ensure the correct DSL standard is selected (e.g., VDSL2 or ADSL2+). Try a different microfiber filter if using ADSL. Verify with your ISP that the line is active.
Can I use the Vigor167 as a router without a DSL connection?
Yes, you can use it as a wired router. Connect the WAN port (DSL port) to a modem via Ethernet, or use the Ethernet WAN mode in the setup menu. The four LAN ports will serve your devices.
How do I enable Quality of Service (QoS)?
Navigate to Bandwidth Management in the web interface. Enable QoS, set your upload/download speeds, and create rules to prioritize traffic (e.g., VoIP, gaming).
What does the USB port on the Vigor167 do?
The USB 2.0 port can be used for connecting a USB storage device for file sharing via SMB or FTP, or for attaching a 3G/4G USB modem as a backup WAN connection.
How can I access my Vigor167 remotely?
Enable Remote Management under System Maintenance > Management. Set a port (default 8080) and ensure you have a public IP or dynamic DNS. Use https://your_public_ip:port to access.
The device is overheating; what should I do?
Ensure the router is placed in a well-ventilated area, away from direct sunlight and other heat sources. Do not stack objects on top of it. If the problem persists, contact support.
User questions about Vigor167 Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual Vigor167 - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vigor167 by Draytek.