Vigor 2765Vac - Router Draytek - Free user manual and instructions
Find the device manual for free Vigor 2765Vac Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | DrayTek |
| Model | Vigor 2765Vac |
| Dimensions (W x D x H) | 220 x 160 x 40 mm |
| Weight | 0.8 kg |
| Power Supply | 12V DC, 2A |
| Power Consumption | 15W max |
| WAN Ports | 1 x Gigabit Ethernet (VDSL2/ADSL2+ or WAN) |
| LAN Ports | 4 x Gigabit Ethernet |
| Wi-Fi Standard | 802.11ac (dual-band, up to 1200 Mbps) |
| USB Ports | 1 x USB 2.0 |
| Firewall Features | SPI, DoS prevention, content filtering, VPN pass-through |
| VPN Support | PPTP, L2TP, IPSec, OpenVPN |
| Main Functions | Routing, NAT, DHCP, QoS, VLAN, TR-069 management |
| Maintenance | Clean with soft dry cloth; avoid liquids |
| Safety | Operate in well-ventilated area; keep away from heat sources |
| Spare Parts & Repairability | Contact DrayTek support for replacement parts; not user-serviceable |
| General Information | Firmware upgrade via web interface; supports IPv6 |
Frequently Asked Questions - Vigor 2765Vac Draytek
How do I reset the Vigor 2765Vac to factory defaults?
Press and hold the Reset button on the back panel for at least 10 seconds using a paperclip until the PWR LED starts flashing. Then release the button.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1, username is admin, and password is admin. It is recommended to change the password immediately.
How can I update the firmware on my DrayTek router?
Access the web interface, go to System Maintenance > Firmware Upgrade. Download the latest firmware from the DrayTek website and upload the file.
Why is my Wi-Fi signal weak?
Check for interference from other devices, ensure the router is placed centrally and elevated. You can also adjust the Wi-Fi channel in the router settings to avoid congestion.
How do I set up a VPN on the Vigor 2765Vac?
Go to VPN and Remote Access > VPN Client or VPN Server. Configure the protocol (e.g., OpenVPN) and enter the required parameters. Detailed steps are in the user manual.
Can I use the router with a cable modem instead of DSL?
Yes, you can set the WAN port to Eth mode via the web interface. The router supports both DSL and Ethernet WAN connections.
How do I enable Quality of Service (QoS)?
Navigate to Bandwidth Management > Quality of Service. You can prioritize traffic by application or device to ensure smooth performance for streaming and gaming.
The router is overheating. What should I do?
Ensure the router is placed in a well-ventilated area, not on soft surfaces. Clean dust from vents. If the problem persists, contact DrayTek support.
How do I block specific websites on my network?
Use the Content Filtering feature under Firewall. You can create URL filters or keyword filters to block unwanted sites.
What is the maximum number of devices that can connect?
The router supports up to 253 devices via DHCP. However, performance may degrade with a high number of active connections.
User questions about Vigor 2765Vac Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual Vigor 2765Vac - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vigor 2765Vac by Draytek.
USER MANUAL Vigor 2765Vac Draytek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draytek
Model : Vigor 2765Vac
Category : Router