IP199S - Boiler Rinnai - Free user manual and instructions
Find the device manual for free IP199S Rinnai in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wall-mounted condensing boiler |
| Brand | Rinnai |
| Model | IP199S |
| Category | Gas condensing boiler |
| Dimensions (H x W x D) | 700 x 400 x 300 mm |
| Net weight | 30 kg |
| Power supply | 230 V / 50 Hz |
| Nominal thermal output | 28 kW |
| Seasonal energy efficiency | Class A (≥ 92%) |
| Fuel type | Natural gas (G20) or propane (G31) |
| Maximum gas pressure | 20 mbar (G20) / 37 mbar (G31) |
| Operating temperature | 30 - 80 °C |
| Max. operating pressure | 3 bar |
| Expansion vessel capacity | 8 liters |
| Frost protection | Built-in down to -15 °C |
| Main functions | Central heating and instantaneous domestic hot water production |
| Flue connection | Concentric flue 60/100 mm |
| Protection rating | IPX4 |
| Maintenance and cleaning | Annual cleaning of burner and heat exchanger; check of hydraulic circuit |
| Safety | Anti-overheating, anti-freeze safety device, gas pressure switch, thermocouple |
| Spare parts and repairability | Available for 10 years; repairability index: 8.0/10 |
| General information | Manual available for PDF download at notice-facile.com |
Frequently Asked Questions - IP199S Rinnai
How to turn the Rinnai IP199S boiler on and off?
Use the on/off switch on the control panel. For extended shutdown, cut off the power supply and close the gas valve.
What to do in case of an error code on the screen?
Refer to the manual to identify the code. Common codes are E01 (flame fault) and E05 (overheating). Reset by pressing the Reset button after correcting the cause.
How to adjust the heating water temperature?
Turn the temperature adjustment knob on the front panel or use the remote control. The recommended range is 50 to 70 °C.
Why does hot water take time to reach the tap?
This may be due to the distance from the draw-off point or insufficient flow. Check that the circulator is working and the valves are open.
Is annual maintenance mandatory?
Yes, annual maintenance by a qualified professional is mandatory to ensure safety and efficiency. It includes cleaning the burner and checking emissions.
How to bleed air from the heating circuit?
Use the manual air vents on the radiators and the automatic air vent of the boiler. Open the vents until water comes out without bubbles.
The circuit pressure is too low, what to do?
Fill the circuit via the filling valve to 1.0-1.5 bar (cold). If the pressure drops regularly, look for a leak.
Can I use the boiler without gas?
No, the boiler operates exclusively on gas. In case of a cut-off, the system stops automatically and requires a reset after restoration.
How to clean the outside of the boiler?
Use a soft, damp cloth. Do not use abrasive products or solvents. Disconnect the power supply before cleaning.
Where to find spare parts for the IP199S model?
Spare parts are available from Rinnai authorized dealers or on specialized websites. Use the part reference given in the manual.
User questions about IP199S Rinnai
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Boiler in PDF format for free! Find your manual IP199S - Rinnai and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IP199S by Rinnai.
USER MANUAL IP199S Rinnai
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rinnai
Model : IP199S
Category : Boiler