Sharpy Wash 330 - Projector Claypaky - Free user manual and instructions
Find the device manual for free Sharpy Wash 330 Claypaky in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moving Head Wash Light |
| Brand | Claypaky |
| Model | Sharpy Wash 330 |
| Light Source | 330 W LED (White) |
| Power Consumption | 400 W (max) |
| Voltage / Frequency | 100-240 V AC, 50/60 Hz |
| Weight | 11 kg (24.3 lbs) |
| Dimensions (LxWxH) | 400 x 300 x 450 mm (15.7 x 11.8 x 17.7 in) |
| IP Rating | IP20 |
| Control Protocol | DMX512, RDM |
| DMX Channels | 17 / 21 / 26 (selectable) |
| Pan / Tilt Range | 540° / 270° |
| Colors | CMY + CTB + CTO + CTC |
| Dimmer | 0-100% linear |
| Strobe | 0-25 Hz |
| Beam Angle | 10° - 50° (motorized zoom) |
| Housing Material | Aluminum and high-temperature plastic |
| Cooling | Active fan, temperature-controlled |
| Safety Features | Safety cable attachment point, tilt lock |
| Maintenance | Periodic lens cleaning; fan filter replacement every 500 hours |
| Accessories Included | Power cable, DMX cable, mounting brackets, safety cable |
| Reparability | Modular design; user-accessible fuse and lamp module |
Frequently Asked Questions - Sharpy Wash 330 Claypaky
Where can I download the user manual for the Claypaky Sharpy Wash 330?
You can download the manual for free from notice-facile.com or the official Claypaky website. It is available in PDF format.
How do I clean the lens and housing of the Sharpy Wash 330?
Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Avoid abrasive cleaners. Clean the lens when dust or smudges affect light output.
What is the recommended procedure for replacing the LED module?
The LED module should only be replaced by a qualified technician. Disconnect power, allow the fixture to cool, then remove the access panel and disconnect wiring. Follow the service manual.
How do I set the DMX address on the Sharpy Wash 330?
Use the control panel menu: navigate to 'DMX Address' and set the desired value using the up/down buttons. The fixture supports RDM for remote addressing.
What safety precautions should I take when installing the fixture?
Always use a safety cable attached to the designated anchor point. Ensure the mounting structure can bear at least 10 times the fixture weight. Keep a distance from flammable materials.
Why is the fan running loudly or not spinning?
Check for obstructions or dust buildup on the fan filter. If the fan fails, replace it immediately to prevent overheating. The fixture will shut down if temperature exceeds safe limits.
Can I use the Sharpy Wash 330 outdoors?
The fixture is rated IP20 and is not weatherproof. Use only in dry, indoor environments. Exposure to rain or moisture can cause damage and void warranty.
How do I reset the pan/tilt motors?
Access the menu and select 'Reset' or 'Home'. The fixture will automatically recalibrate the motors. Ensure unobstructed movement range during reset.
What is the expected lifespan of the LED source?
The LED engine is rated for approximately 50,000 hours of typical use. Gradual color shift and brightness reduction may occur over time.
How do I update the firmware?
Firmware updates are performed via the DMX data link using a compatible uploader. Download the latest firmware from Claypaky's support site and follow the update instructions.
User questions about Sharpy Wash 330 Claypaky
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projector in PDF format for free! Find your manual Sharpy Wash 330 - Claypaky and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Sharpy Wash 330 by Claypaky.
USER MANUAL Sharpy Wash 330 Claypaky
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Claypaky
Model : Sharpy Wash 330
Category : Projector