AL200 - Receiver S.M.S.L - Free user manual and instructions
Find the device manual for free AL200 S.M.S.L in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Integrated Amplifier / Receiver |
| Brand | S.M.S.L |
| Model | AL200 |
| Power Output | 2 x 100W (4 ohms) |
| Frequency Response | 20Hz - 20kHz (+-0.5dB) |
| Total Harmonic Distortion | < 0.05% |
| Signal-to-Noise Ratio | > 98dB |
| Inputs | 2x RCA, 1x Optical, 1x Coaxial, Bluetooth 5.0 |
| Outputs | Speaker terminals (binding posts), Subwoofer pre-out |
| Bluetooth Version | 5.0 with aptX HD |
| Dimensions (W x D x H) | 280 x 250 x 60 mm |
| Weight | 3.5 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Standby Power Consumption | < 0.5W |
| Remote Control | Included (IR) |
| Protection Circuits | Overheat, overcurrent, short circuit |
| Maintenance | Clean with a dry, soft cloth. Avoid liquids and solvents. |
| Safety | Do not open the device. Use in a well-ventilated area. Keep away from moisture. |
| Spare Parts and Repairability | Contact S.M.S.L customer service for parts or repairs. |
| General Information | Compact integrated amplifier suitable for home audio systems. Warranty: 1 year. |
Frequently Asked Questions - AL200 S.M.S.L
How do I connect Bluetooth to the AL200?
Press the Bluetooth button on the front panel or remote to enter pairing mode. Enable Bluetooth on your device and select 'SMSL AL200'. No password is needed.
What is the maximum power output?
The AL200 delivers 2 x 100W into 4 ohms and approximately 2 x 60W into 8 ohms.
Can I connect a subwoofer?
Yes, there is a subwoofer pre-out on the rear panel. Connect it to your powered subwoofer using an RCA cable.
How do I reset the amplifier?
Turn off the unit, unplug it for 30 seconds, then plug back in and power on. This performs a soft reset.
What speaker impedance is supported?
The AL200 works with speakers rated 4 to 8 ohms. Ensure the impedance matches your speakers.
Why is there no sound?
Check that the input source is selected correctly, volume is turned up, and speakers are properly connected. Ensure Bluetooth or cables are secure.
Does it have a DAC?
Yes, the AL200 includes a built-in DAC supporting optical and coaxial inputs up to 24-bit/192kHz.
How do I clean the device?
Use a dry, soft cloth to wipe the exterior. Do not use any liquids or cleaning agents.
What is the standby power consumption?
Standby consumption is less than 0.5W, making it energy efficient.
Where can I find the user manual?
You can download the manual from notice-facile.com in PDF format. It is also available on the S.M.S.L official website.
User questions about AL200 S.M.S.L
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual AL200 - S.M.S.L and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AL200 by S.M.S.L.