SMEG

WNP96SLAAIN - Washing machine SMEG - Free user manual and instructions

Find the device manual for free WNP96SLAAIN SMEG in PDF.

📄 41 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SMEG WNP96SLAAIN - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeFreestanding Washing Machine
BrandSmeg
ModelWNP96SLAAIN
Capacity9 kg
Spin Speed1600 rpm
Energy ClassA
Noise Level (Wash)52 dB(A)
Noise Level (Spin)77 dB(A)
Number of Programs15
DisplayLED
Delay StartUp to 24 hours
Child LockYes
Drum MaterialStainless Steel
Drum Volume63 L
Water Consumption52 L per cycle
Power Consumption0.75 kWh per cycle
Voltage / Frequency220-240 V / 50 Hz
Dimensions (H x W x D)85 x 60 x 65 cm
Weight75 kg
ColorWhite
Warranty2 years

Frequently Asked Questions - WNP96SLAAIN SMEG

How do I clean the detergent drawer?
Remove the drawer by pressing the release button. Wash it under running water and dry before reinserting. Clean the compartment with a brush periodically.
What do I do if the machine does not start?
Check the power supply, door closure, and water tap. Ensure the program is selected and the start button is pressed. Refer to the troubleshooting section.
How can I prevent mold and odors?
Leave the door open after use, clean the door seal regularly, and run a maintenance wash (e.g., 90°C cycle) with detergent or a cleaner monthly.
What is the maximum load for cotton?
For a 9 kg capacity machine, the maximum load for cotton is 9 kg. For other fabrics, reduce the load (e.g., synthetics 4 kg, delicates 2 kg).
How do I use the delay start function?
Select the desired program, then press the delay start button repeatedly to set the delay time (1-24 hours). Press start; the machine will begin at the set time.
What does the child lock do and how to activate it?
The child lock prevents accidental button presses. Activate by pressing and holding the child lock button for 3 seconds. Deactivate the same way.
How do I clean the filter?
At the bottom front, open the filter cover, place a container, unscrew the filter, and clean it. Remove any debris. Reinsert and tighten.
What should I do if the machine is unbalanced?
The machine will try to redistribute the load. If it fails, manually redistribute the laundry and restart the spin cycle. Avoid overloading.
Can I install the machine under a counter?
Yes, the machine is freestanding but can be placed under a counter if there is adequate ventilation and the top panel is removed (if specified in manual).
How do I interpret error codes?
Common codes: E01 (door lock fault), E02 (drain pump failure), E03 (water supply issue). Consult the manual for a full list and reset instructions.

User questions about WNP96SLAAIN SMEG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Washing machine in PDF format for free! Find your manual WNP96SLAAIN - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WNP96SLAAIN by SMEG.

USER MANUAL WNP96SLAAIN SMEG

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SMEG

Model : WNP96SLAAIN

Category : Washing machine