ALT230WH - Basket BROAN - Free user manual and instructions
Find the device manual for free ALT230WH BROAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Under Cabinet Range Hood |
| Brand | Broan |
| Model | ALT230WH |
| Width | 76.2 cm (30 inches) |
| Depth | 50.8 cm (20 inches) |
| Height | 15.2 cm (6 inches) |
| Weight | 7.7 kg (17 lbs) |
| Power Supply | 120 V, 60 Hz, 5 A |
| Motor Power | 150 CFM (cubic feet per minute) |
| Noise Level | 65 dB (low speed), 75 dB (high speed) |
| Lighting | 1 incandescent bulb 40 W (not included) |
| Filter Type | Dishwasher-safe metal grease filters |
| Controls | Slide switch (on/off, speed, light) |
| Duct Diameter | 15.2 cm (6 inches) - vented to outside or recirculating |
| Installation | Under cabinet, screw mounting (hardware included) |
| Maintenance | Clean filters monthly; wipe exterior with a damp cloth |
| Warranty | 1 year (parts and labor) |
| Safety | Unplug before maintenance; do not operate without filter |
| Replacement Parts | Filters, switch, bulb, motor - available on Broan website |
| Repairability | Repairability index not available, but parts accessible |
| Certifications | UL (Canada and United States) |
Frequently Asked Questions - ALT230WH BROAN
How to install the Broan ALT230WH hood?
Installation must be done by a professional. Follow the instructions in the manual: attach the hood under the cabinet using the provided screws, connect the exhaust duct (if vented mode) and plug in the power. Make sure the hood is level.
What type of bulb to use for lighting?
Use a 40 W maximum incandescent bulb, type E12 (screw base). Always replace with a bulb of the same wattage to avoid overheating.
How to clean the grease filters?
Remove the metal filters and wash them in the dishwasher or by hand with hot soapy water. Dry them completely before reinstalling. Clean them monthly to maintain performance.
The hood makes an abnormal noise, what to do?
Check that the filters are clean and properly in place. Make sure the mounting screws are tight. If the noise persists, the motor may be defective; contact Broan customer service.
Can I use the hood without ducting to the outside?
Yes, the ALT230WH hood can operate in recirculation mode with a charcoal filter kit (sold separately). In this case, the air is filtered and returned to the kitchen.
How to change the hood's bulb?
Unplug the hood. Remove the diffuser or cap (depending on model). Unscrew the old bulb and replace it with a new 40 W max bulb. Screw it back and replace the diffuser.
The hood does not turn on, what to check?
Check that the hood is plugged in and the circuit breaker is not tripped. Test the outlet with another appliance. If nothing works, the switch or motor may be defective.
What is the recommended mounting height?
For an electric range, install the hood 76 cm (30 inches) above the surface. For a gas range, 91 cm (36 inches). Observe safety distances.
Where to find replacement parts?
Replacement parts are available on the official Broan website or from authorized dealers. Use model number ALT230WH to order filters, bulbs, or switches.
The hood has poor suction, why?
Check that the grease filters are not clogged. Make sure the exhaust duct is not blocked. If in recirculation mode, the charcoal filter must be replaced every 6 to 12 months.
User questions about ALT230WH BROAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Basket in PDF format for free! Find your manual ALT230WH - BROAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ALT230WH by BROAN.