SolidRack R3103 - NAS Rocstor - Free user manual and instructions
Find the device manual for free SolidRack R3103 Rocstor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Attached Storage (NAS) |
| Model | SolidRack R3103 |
| Brand | Rocstor |
| Form Factor | Rackmount (3U) |
| Dimensions (W x H x D) | 482.6 mm x 132.5 mm x 650 mm (19" x 5.2" x 25.6") |
| Weight | Approximately 18 kg (39.7 lbs) |
| Power Supply | Dual redundant 750W hot-swappable PSU |
| Main Functions | Data storage, file sharing, backup, RAID support (0,1,5,6,10), iSCSI, virtualization support |
| Drive Bays | 3.5" / 2.5" SATA/SAS, hot-swappable (quantity not specified) |
| Processor | Intel Xeon or equivalent |
| Memory | ECC DDR4 (capacity not specified) |
| Network Interfaces | Dual 10GbE (RJ-45) plus management port |
| Operating System | Rocstor NAS OS or compatible (Linux-based) |
| Cooling | Redundant hot-swappable fans |
| Maintenance & Cleaning | Dust filters, periodic cleaning with compressed air, check fan operation |
| Safety | Compliant with FCC, CE, RoHS; overload protection, ESD prevention |
| Spare Parts & Repairability | Modular design; hard drives, PSU, fans, memory are field-replaceable; limited warranty |
| General Information | Designed for data centers and enterprise environments, supports remote management |
Frequently Asked Questions - SolidRack R3103 Rocstor
How to perform initial setup of the Rocstor SolidRack R3103 NAS?
Connect the NAS to your network via the Ethernet ports, power it on, and use the web-based management interface (default IP shown on LCD or DHCP assigned) to configure RAID, users, and shares. Refer to the quick start guide for step-by-step wizard.
What RAID levels are supported?
The NAS supports RAID 0, 1, 5, 6, and 10 for data redundancy and performance. You can select the appropriate level based on your needs during initial volume creation.
Can I replace hard drives without shutting down?
Yes, the drive bays are hot-swappable. However, for RAID arrays, ensure the array is in a healthy state before replacing a failed drive, and allow time for rebuild.
How to access data remotely?
Enable remote access via the NAS web interface (e.g., FTP, WebDAV, VPN). You may need to configure port forwarding on your router for external access.
What is the power consumption?
Typical power consumption under load is around 150-200W, depending on hard drives and CPU usage. The dual redundant PSUs are rated at 750W each for redundancy.
How to reset the administrator password?
Locate the reset button on the rear panel (or inside the chassis). Press and hold for 10 seconds while the NAS is powered on. This will reset admin credentials to factory defaults.
Is the NAS compatible with 2.5-inch SSDs?
Yes, the drive bays accept both 3.5-inch and 2.5-inch SATA/SAS drives. For optimal performance, consider using enterprise-grade SSDs.
What backup options are available?
The NAS supports built-in backup (rsync, cloud sync) and third-party software. You can schedule backups to external USB drives or other NAS devices.
How to update the firmware?
Download the latest firmware from the Rocstor support page. Upload it via the web interface under System Update. Do not power off during update.
Does the NAS support virtualization (VMs)?
Depending on the model variant, the SolidRack R3103 may support hypervisor environments via iSCSI or NFS, but it is not a full virtualization host. Use it as shared storage for VMware or Hyper-V.
User questions about SolidRack R3103 Rocstor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual SolidRack R3103 - Rocstor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SolidRack R3103 by Rocstor.