Rocstor

SolidRack R3003 - NAS Rocstor - Free user manual and instructions

Find the device manual for free SolidRack R3003 Rocstor in PDF.

📄 22 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Rocstor SolidRack R3003 - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Rackmount NAS (2U)
Brand Rocstor
Model SolidRack R3003
Form Factor 19-inch rackmount, 2U height
Dimensions (W x H x D) 19.0 x 3.5 x 20.0 inches (483 x 88 x 508 mm)
Weight Approximately 33 lbs (15 kg)
Processor Intel Xeon D-1521 (quad-core, 2.4 GHz)
Memory 16 GB DDR4 ECC (upgradable to 64 GB)
Drive Bays 12 x 3.5" SATA III hot-swappable
RAID Support RAID 0, 1, 5, 6, 10, JBOD
Network Connectivity 4 x Gigabit Ethernet, 2 x 10GbE SFP+
USB Ports 2 x USB 3.0, 2 x USB 2.0
Power Supply Dual redundant 500W hot-swappable PSU
Cooling 4 x 40mm hot-swappable fans
Management Web GUI, SSH, SNMP, IPMI
Supported Protocols SMB/CIFS, NFS, AFP, FTP, iSCSI, rsync
Operating System Rocstor OS (Linux-based)
Maximum Storage Capacity Up to 168 TB raw (using 14TB drives)
Noise Level ~30 dB at idle
Operating Temperature 0°C to 40°C
Safety Certifications CE, FCC, RoHS
Warranty 3 years limited

Frequently Asked Questions - SolidRack R3003 Rocstor

How do I initialize the SolidRack R3003 NAS for the first time?
Connect the NAS to your network via an Ethernet port, power it on, and wait for it to boot. Use the Rocstor web GUI tool to discover the device on your network. Access the GUI via a web browser, then follow the setup wizard to configure RAID, create volumes, and set up user accounts.
What RAID configurations are supported?
The SolidRack R3003 supports RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, and JBOD. RAID 5 or 6 is recommended for a balance of performance and redundancy.
Can I expand storage capacity after initial setup?
Yes, you can replace existing drives with larger ones or add additional drives if bays are empty. The NAS supports online RAID expansion and migration without data loss. Ensure compatibility with your RAID level.
How do I access my files remotely?
Enable cloud services in the NAS settings or set up VPN access. Alternatively, configure FTP or WebDAV with proper security. Use the Rocstor mobile app for easy access.
What backup solutions are available?
The NAS supports local backups via USB drives, remote backups using rsync or RTRR, and cloud backups to services like Amazon S3. Schedule automatic backups via the GUI.
How do I replace a failed hard drive?
Identify the failed drive via the NAS GUI or front LED indicators. Hot-swap the drive by removing it from the bay and inserting a new one of equal or larger capacity. The RAID will automatically rebuild. Do not interrupt the process.
Can I use different capacity drives in the same array?
Yes, but with limitations. In RAID 5/6, the array uses the smallest drive's capacity for all drives. For better space utilization, consider using drives of the same capacity or use RAID 10.
What is the default IP address?
By default, the NAS obtains an IP address via DHCP. Use the Rocstor discovery tool (available on the included CD or website) to find the assigned IP on your network. You can also connect directly via USB for initial setup.
How do I reset the administrator password?
Press and hold the reset button on the front panel for 10 seconds while the NAS is powered on. This will reset the password to default (admin/admin) and restore network settings. Note: This does not affect stored data.
Is the SolidRack R3003 compatible with virtualization platforms?
Yes, it supports iSCSI and NFS storage for VMware, Hyper-V, and other hypervisors. It is also Citrix Ready and VMware vSphere certified.

User questions about SolidRack R3003 Rocstor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your NAS in PDF format for free! Find your manual SolidRack R3003 - Rocstor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SolidRack R3003 by Rocstor.

USER MANUAL SolidRack R3003 Rocstor

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Rocstor

Model : SolidRack R3003

Category : NAS