FAB50URCR3 - Fridge SMEG - Free user manual and instructions
Find the device manual for free FAB50URCR3 SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Refrigerator |
| Brand | Smeg |
| Model | FAB50URCR3 |
| Width | 500 mm |
| Height | 850 mm |
| Depth | 600 mm |
| Weight | 55 kg |
| Power Supply | 220-240 V, 50 Hz |
| Energy Class | F |
| Annual Energy Consumption | 235 kWh/year |
| Refrigerant | R600a |
| Climate Class | N-ST |
| Noise Level | 41 dB(A) |
| Interior Light | LED |
| Number of Shelves | 4 tempered glass shelves |
| Door Reversibility | Possible (requires service) |
| Thermostat Type | Mechanical knob |
| Defrost System | Manual defrost (frost-free not available) |
| Cleaning Instructions | Use mild soap and water; avoid abrasives |
| Safety Features | Stabilizing feet, anti-tip bracket included |
| Spare Parts Availability | Via Smeg authorized service centers |
Frequently Asked Questions - FAB50URCR3 SMEG
How do I set the temperature on my Smeg FAB50URCR3?
Turn the thermostat knob inside the refrigerator. Numbers typically range from 1 (warmest) to 5 (coldest). For normal use, set to 3. Allow 24 hours to stabilize.
Why is my refrigerator not cooling properly?
Check that the thermostat is not set to 0 (off). Ensure the door closes fully and the gasket is clean. Also verify that the condenser coils at the back are free of dust. If problem persists, contact Smeg service.
How do I defrost the freezer compartment?
Turn the thermostat to 0 and unplug the appliance. Remove all food and leave the door open. Place towels to catch water. Do not use sharp tools to remove ice. Once defrosted, dry and restart.
What is the recommended temperature for the refrigerator?
The ideal refrigerator temperature is between 0°C and 4°C (32°F-39°F). Use the thermostat to adjust accordingly.
Can I reverse the door opening direction?
Yes, the door is reversible. However, it requires disassembly and reassembly. It is recommended to have a qualified technician perform the reversal. Consult the manual for steps.
How often should I clean the condenser coils?
Clean the condenser coils at the back of the refrigerator every 6 months using a vacuum or soft brush to remove dust buildup for optimal efficiency.
What should I do if the interior light does not work?
First check if the bulb is loose or needs replacement. The FAB50URCR3 uses an LED light that may require a service technician to replace if faulty. Contact Smeg support.
Is it normal to hear gurgling or clicking sounds?
Yes, these sounds are normal. Gurgling comes from refrigerant circulating, and clicking occurs when the compressor turns on/off. If you hear loud rattling or banging, check that the appliance is level.
How do I level the refrigerator?
Adjust the two front leveling feet by turning them clockwise to raise or counterclockwise to lower. Use a spirit level to ensure the fridge is stable and slightly tilted back so the door closes automatically.
Where can I find spare parts or service?
Contact Smeg authorized service centers. Parts like shelves, gaskets, and knobs are available. Check the Smeg website or contact customer service with your model number FAB50URCR3.
User questions about FAB50URCR3 SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual FAB50URCR3 - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FAB50URCR3 by SMEG.
USER MANUAL FAB50URCR3 SMEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SMEG
Model : FAB50URCR3
Category : Fridge