HYEA5200X - Drill HYUNDAI - Free user manual and instructions
Find the device manual for free HYEA5200X HYUNDAI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Corded Drill |
| Model | HYEA5200X |
| Brand | Hyundai |
| Power Input | 520 W |
| Voltage | 230 V ~ 50/60 Hz |
| No-Load Speed | 0-2800 rpm |
| Chuck Type | Keyless, 13 mm (1/2") |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Capacity (Wood) | 30 mm |
| Variable Speed | Yes, with trigger |
| Forward/Reverse | Yes |
| Dimensions (L x W x H) | 28 x 7 x 20 cm |
| Weight | 1.6 kg |
| Power Cord Length | 2.5 m |
| Main Functions | Drilling in wood, metal, plastic; screwdriving with suitable bits |
| Maintenance | Clean vents, check carbon brushes periodically |
| Safety Features | Lock-on button, double insulation |
| Spare Parts | Carbon brushes, chuck, power cord available |
| Reparability | User-replaceable carbon brushes; professional service for others |
| Includes | Drill, auxiliary handle, depth stop |
Frequently Asked Questions - HYEA5200X HYUNDAI
How do I change the drill bit?
To change the bit, first ensure the drill is unplugged. Then rotate the chuck sleeve counterclockwise to open the jaws, insert the bit, and tighten by rotating clockwise. The keyless chuck allows quick changes without a tool.
What materials can this drill handle?
The HYEA5200X can drill into wood (up to 30 mm), steel (up to 13 mm), plastic, and masonry with appropriate bits. Use a hammer function (if available) for masonry; this model is a standard drill without hammer.
How do I adjust the speed?
The drill has a variable speed trigger. Press the trigger lightly for low speed and harder for higher speed. This allows precise control for different tasks.
What safety precautions should I take?
Always wear safety glasses and hearing protection. Keep the work area clean. Do not wear loose clothing. Disconnect the drill when changing bits or performing maintenance. Use the auxiliary handle for better control.
Can I use the drill for screwdriving?
Yes, the drill has a forward/reverse switch and variable speed, making it suitable for driving screws. Use a screwdriver bit and set the torque clutch (if available) to prevent over-tightening.
How do I clean and maintain the drill?
Unplug the drill. Wipe the exterior with a dry cloth. Clean the ventilation slots with compressed air to remove dust. Periodically check the carbon brushes; replace them if worn.
What is the maximum drilling depth?
The maximum depth depends on the bit length. Typically, you can drill up to the length of the bit, but the drill’s depth stop (included) can be set to control depth precisely.
Is the drill double insulated?
Yes, the HYEA5200X is double insulated for safety. It does not require a grounded (three-prong) outlet. Use a suitable extension cord if needed.
Where can I find spare parts?
Spare parts such as carbon brushes, chuck, and power cord are available from Hyundai service centers or authorized dealers. Check the user manual for part numbers.
What should I do if the drill stops working?
First, check if it is properly plugged in and the outlet is live. If it still doesn’t work, the carbon brushes may be worn or the motor overload protection tripped. Wait a few minutes and try again. If the problem persists, contact customer support.
User questions about HYEA5200X HYUNDAI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual HYEA5200X - HYUNDAI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HYEA5200X by HYUNDAI.
USER MANUAL HYEA5200X HYUNDAI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HYUNDAI
Model : HYEA5200X
Category : Drill