TruDose Chemical Controller - Uncategorized Jandy - Free user manual and instructions
Find the device manual for free TruDose Chemical Controller Jandy in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Chemical Controller for Swimming Pool |
| Brand | JANDY |
| Model | TruDose Chemical Controller |
| Dimensions (L x H x D) | 200 x 150 x 80 mm |
| Weight | 1.2 kg |
| Power Supply | 220-240 V AC, 50/60 Hz |
| Main Functions | Automatic pH and chlorine control, digital display, threshold alarms |
| Maintenance and Cleaning | Regular cleaning of sensors and electrodes, checking dosing pumps |
| Safety | Automatic shutdown in case of probe or flow fault, IP54 protection |
| Spare parts and repairability | Sensors, electrodes, dosing pumps, electronic boards available |
| General Information | Device designed for pools and spas, wall-mounted, 2-year warranty |
Frequently Asked Questions - TruDose Chemical Controller Jandy
How to install the TruDose Chemical Controller?
Installation must be carried out by a professional. Mount the device on the wall near the pool, connect the dosing pumps to the chemicals, and plug in the power supply.
What chemicals can be used with this controller?
The TruDose is compatible with liquid or tablet chlorine solutions, as well as acids or bases for pH adjustment.
How to calibrate the probes?
Use the provided calibration solutions. Dip the probes in pH 7 solution then pH 4 (or 10), and follow the on-screen instructions.
What to do if the alarm sounds?
First check the error message displayed. Possible causes: dirty probe, low product level, insufficient flow. Consult the troubleshooting section of the manual.
How often to clean the sensors?
It is recommended to clean the sensors every 2 to 4 weeks, or more often in hard water areas, with a soft cloth and clean water.
Can the controller be used in winter?
Yes, but if the pool is winterized, drain the dosing pumps and protect the device from freezing. In winter operation, reduce the setpoints.
How to replace an electrode?
Disconnect the old electrode, clean the connector, screw on the new electrode, and perform a full calibration.
Where to find spare parts?
Spare parts are available from authorized Jandy dealers. Contact customer service for references.
How to set the pH and chlorine setpoints?
Access the adjustment menu via the touch screen, use the arrows to adjust the desired values and confirm. Recommended ranges: pH 7.2-7.6, chlorine 1-3 ppm.
What to do if dosing does not work?
Check the chemical level, the dosing pump (priming, blockages), fuses, and connections. Consult the manual for the flow test.
User questions about TruDose Chemical Controller Jandy
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TruDose Chemical Controller - Jandy and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TruDose Chemical Controller by Jandy.
USER MANUAL TruDose Chemical Controller Jandy
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Jandy
Model : TruDose Chemical Controller
Category : Uncategorized