Simpson TM3080241E - Pressure washer

TM3080241E - Pressure washer Simpson - Free user manual and instructions

Find the device manual for free TM3080241E Simpson in PDF.

📄 132 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Simpson TM3080241E - page 6
View the manual : Français FR English EN Español ES
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Pressure Washer
Dimensions (L x W x H) 50 x 40 x 90 cm
Weight 25 kg
Power Supply Electric 230 V / 50 Hz
Maximum Pressure 200 bar
Water Flow Rate 8 L/min
Motor Type Induction
Main Functions High-pressure washing, rinsing, detergent application
Maintenance and Cleaning Water filter cleaning, engine oil drain
Safety Safety valve, automatic shut-off in case of overheating
Spare Parts and Repairability Seal kit, replacement lance, nozzles
General Information Simpson brand, model TM3080241E, 2-year warranty

Frequently Asked Questions - TM3080241E Simpson

How to start the appliance?
Plug the appliance into a suitable electrical outlet, open the water tap, then set the switch to the on position. Make sure the lance trigger is unlocked.
What type of oil to use for the motor?
Use a high-quality SAE 30 motor oil for pressure washers. Check the oil level before each use.
How to clean the water filter?
Remove the filter at the water inlet, rinse it with clean water to remove impurities, then put it back. Perform this operation regularly.
Can I use hot water?
No, this pressure washer is designed for cold water only. Using hot water can damage the pump and reduce the appliance's lifespan.
How to store the pressure washer?
Drain the remaining water from the pump and hoses, clean the appliance, then store it in a dry place protected from frost.
What to do if the pressure is low?
Check that the nozzle is not clogged, the water filter is clean, and the water supply is sufficient. If the problem persists, contact customer service.
How to apply detergent?
Use the low-pressure nozzle (often marked 'SPRAY' or 'CHEMICAL'), dip the detergent hose into the product, then press the trigger to apply.
How to change the nozzle?
Unscrew the used nozzle by turning counterclockwise, then screw on the new nozzle firmly. Make sure it is securely attached before use.
The appliance does not turn on, what to do?
Check the connection to the electrical outlet, the condition of the power cord and the switch. If everything is correct, consult the manual to test the fuses or contact customer service.
Where to find spare parts?
Spare parts are available on the official Simpson website or from authorized dealers. Use the model number TM3080241E to identify compatible parts.

User questions about TM3080241E Simpson

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Pressure washer in PDF format for free! Find your manual TM3080241E - Simpson and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TM3080241E by Simpson.

USER MANUAL TM3080241E Simpson

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Simpson

Model : TM3080241E

Category : Pressure washer