PowerEdge R470 - Server DELL - Free user manual and instructions
Find the device manual for free PowerEdge R470 DELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Server (2U) |
| Dimensions (H x W x D) | 87.3 mm x 482.4 mm x 690 mm |
| Weight | 20 kg (maximum configuration) |
| Power Supply | Dual redundant hot-plug 750W AC |
| Processor | Intel Xeon E5-2600 v4 series |
| Memory | 24 DIMM slots, DDR4, up to 768 GB |
| Storage Bays | Up to 10 x 2.5" or 8 x 3.5" hot-swap drives |
| Network Controllers | Broadcom 5720 dual-port 1GbE |
| Management | iDRAC8 Express or Enterprise |
| Expansion Slots | 8 PCIe 3.0 slots |
| RAID Controller | PERC H730P or H830 |
| Operating Systems Supported | Windows Server, Red Hat, SUSE, VMware ESXi |
| Security | TPM 2.0, secure boot, chassis intrusion detection |
| Cooling | 6 hot-swap fans with optional redundant fan |
| Power Consumption | Typical 180W idle, 450W load |
| Maintenance | Hot-swap drives, power supplies, fans; quick release bezel |
| Warranty | 3-year standard hardware warranty |
Frequently Asked Questions - PowerEdge R470 DELL
How do I reset the iDRAC password on my Dell PowerEdge R470?
To reset the iDRAC password, press F2 during boot to enter System Setup. Go to iDRAC Settings, select Reset to Default, and confirm. The default username is root and password is calvin.
What is the maximum RAM capacity of the PowerEdge R470?
The PowerEdge R470 supports up to 768 GB of DDR4 memory using 24 slots of 32 GB RDIMMs or 64 GB LRDIMMs.
How can I replace a failed hard drive in the R470?
Identify the failed drive by the amber LED. Press the release button to unlock the carrier, pull the drive out, insert a new hot-swap drive, and close the handle. The RAID controller will automatically rebuild the array.
How do I update the firmware on my server?
Download the appropriate firmware package from Dell Support. Use the iDRAC web interface (Update and Rollback) or the Dell System Update utility in the OS. We recommend reading the release notes first.
What RAID levels are supported by the internal controller?
The PERC H730P supports RAID 0, 1, 5, 6, 10, 50, and 60. The H830 supports the same plus RAID level migration.
Can I install a third-party operating system on the R470?
Yes, the PowerEdge R470 supports various operating systems including Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and VMware ESXi. Check the compatibility matrix online.
How do I access the BIOS setup?
Press F2 during the Dell logo screen to enter System Setup. From there you can configure hardware, boot order, and power settings.
What is the default iDRAC IP address?
The default iDRAC IP address is obtained via DHCP. If not available, it defaults to 192.168.1.1. You can set a static IP via the iDRAC Settings Utility during boot.
How do I clean the inside of my PowerEdge R470?
Power off the server and unplug it. Use compressed air to blow dust from fans, heat sinks, and components. Avoid using liquid cleaners. Reassemble after cleaning.
Where can I find replacement parts for the R470?
Replacement parts such as power supplies, fans, and drives are available from Dell authorized resellers or Dell Parts. Use the service tag to find compatible parts.
User questions about PowerEdge R470 DELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual PowerEdge R470 - DELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PowerEdge R470 by DELL.
USER MANUAL PowerEdge R470 DELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DELL
Model : PowerEdge R470
Category : Server