TSW202 - Uncategorized Teltonika - Free user manual and instructions
Find the device manual for free TSW202 Teltonika in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Ethernet Switch |
| Model | TSW202 |
| Brand | Teltonika |
| Number of Ports | 8 |
| Port Speed | 10/100/1000 Mbps |
| PoE Support | Yes, 802.3af/at on all ports |
| PoE Budget | 120 W |
| Dimensions (W × D × H) | 440 × 200 × 44 mm |
| Weight | 2.5 kg |
| Power Supply | 48-57 V DC |
| Power Consumption | 15 W (without PoE) |
| Operating Temperature | -40°C to 75°C |
| Mounting | Rack-mount (1U) or DIN rail |
| Switching Capacity | 16 Gbps |
| Management | Web-based, CLI, SNMP |
| VLAN Support | 802.1Q VLAN |
| QoS | 802.1p priority queuing |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Operate in dry environment; avoid direct sunlight |
| Spare Parts / Repairability | No user-serviceable parts; contact support |
Frequently Asked Questions - TSW202 Teltonika
What is the default IP address of the TSW202 switch?
The default IP address is 192.168.1.1 with subnet mask 255.255.255.0.
How do I reset the TSW202 to factory defaults?
Press and hold the Reset button on the front panel for 10 seconds while the device is powered on. Release when the LEDs flash.
Does the TSW202 support PoE?
Yes, all ports support PoE+ (802.3at) with a total budget of 120 W.
Can I mount the TSW202 on a DIN rail?
Yes, the switch comes with a DIN rail bracket included, allowing flexible installation.
What is the operating temperature range of the TSW202?
The switch can operate in temperatures from -40°C to 75°C, making it suitable for industrial environments.
How do I access the web interface?
Connect your computer to the switch via Ethernet, configure your IP to the same subnet (e.g., 192.168.1.10), and open a browser to https://192.168.1.1.
Is the TSW202 managed or unmanaged?
It is a managed switch with features such as VLAN, QoS, and SNMP.
What type of power supply does the TSW202 require?
It requires a 48-57 V DC power supply. The terminal block is included.
How do I update the firmware?
Download the firmware from the Teltonika support site, then upload it via the Firmware Upgrade page in the web interface.
Can I use the TSW202 in a PoE passthrough mode?
No, the TSW202 does not support PoE passthrough. Each port provides power directly to connected devices.
User questions about TSW202 Teltonika
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TSW202 - Teltonika and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TSW202 by Teltonika.
USER MANUAL TSW202 Teltonika
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Teltonika
Model : TSW202
Category : Uncategorized