TSW101 - Uncategorized Teltonika - Free user manual and instructions
Find the device manual for free TSW101 Teltonika in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Industrial Ethernet Switch |
| Dimensions | 125 x 85 x 35 mm |
| Weight | 350 g |
| Power Supply | 9-48 V DC (terminal block) |
| Power Consumption | <5 W |
| Number of Ports | 8 x 10/100/1000 Mbps RJ45 |
| PoE Support | IEEE 802.3af/at on ports 1-4 (total budget 60 W) |
| Operating Temperature | -40°C to +75°C |
| Housing Material | Aluminum with IP30 protection |
| Mounting | DIN rail and wall mount |
| Management | Web interface, CLI, SNMP, Teltonika RMS |
| VLAN Support | 802.1Q, port-based, MAC-based |
| Redundancy | STP, RSTP, MSTP; ERPS |
| Security | 802.1X, ACL, SSH, HTTPS, port security |
| Maintenance | Cleaning with dry cloth; avoid liquids |
| Safety | Complies with CE, FCC, UL standards |
| Spare Parts & Repairability | User serviceable: fanless; replacement via authorized service |
| General Information | Warranty: 2 years; includes quick start guide |
Frequently Asked Questions - TSW101 Teltonika
How do I access the web interface of the TSW101?
By default, the switch has IP 192.168.1.1. Connect your PC to a port, set a static IP in the same subnet, and visit that address. Default login is admin/admin.
Can I use the TSW101 outdoors?
The switch has an IP30 rating, suitable for indoor or sheltered outdoor use. For direct exposure, use an external enclosure.
What is the maximum cable length?
Standard Ethernet cables up to 100 meters (Cat5e or better).
Does the TSW101 support PoE passthrough?
No, it does not have PoE passthrough. It can be powered via PoE PD (802.3af) on port 1, or via terminal block.
How do I reset the switch to factory defaults?
Press and hold the RESET button (on the front panel) for 10 seconds while power is on. All settings will be erased.
Can I manage the switch remotely via cloud?
Yes, Teltonika RMS (Remote Management System) is supported. You can monitor and configure the switch from anywhere.
What power supply is recommended?
Use a regulated 12-48 V DC power supply with at least 1A capacity. A 24V/1A DIN rail supply is typical.
How to enable VLAN configuration?
Go to the web interface under 'Switch' > 'VLAN'. You can set 802.1Q VLANs, port-based VLANs, or MAC-based VLANs.
Is the TSW101 fanless?
Yes, it is completely fanless for silent operation and high reliability.
What is the warranty period?
Teltonika provides a 2-year limited warranty. Check with your distributor for specific terms.
User questions about TSW101 Teltonika
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TSW101 - Teltonika and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TSW101 by Teltonika.
USER MANUAL TSW101 Teltonika
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Teltonika
Model : TSW101
Category : Uncategorized