DCS-5605 - Surveillance Camera D-LINK - Free user manual and instructions
Find the device manual for free DCS-5605 D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Brand | D-Link |
| Model | DCS-5605 |
| Image Sensor | 1/4" CMOS |
| Resolution | 640 x 480 pixels |
| Lens Type | Fixed, f=4.0 mm, F2.0 |
| Night Vision | IR LEDs, up to 5 m |
| Audio | Two-way audio with built-in microphone and speaker |
| Connectivity | Ethernet 10/100 Base-T |
| Power Supply | PoE (802.3af) or DC 5V |
| Dimensions | 70 x 110 x 70 mm |
| Weight | 250 g |
| Mounting | Desktop or wall mount |
| Motion Detection | Yes, with configurable zones and sensitivity |
| Event Notification | Email, FTP, and local recording |
| Security | Password protection, SSL encryption |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Viewing Angle | Horizontal: 60°, Vertical: 45° |
| Indoor/Outdoor | Indoor use only |
| Regulatory Approvals | CE, FCC |
Frequently Asked Questions - DCS-5605 D-LINK
How to reset the D-Link DCS-5605 to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will reboot with default settings. The default IP address is 192.168.0.20, username 'admin' with no password.
What is the default IP address of the DCS-5605?
The default IP address is 192.168.0.20. Make sure your computer is on the same subnet (e.g., 192.168.0.x) to access the camera's web interface.
How to view the camera remotely over the internet?
Enable port forwarding on your router for port 80 (or a custom port) to the camera's local IP. Alternatively, use D-Link's DDNS service or a third-party service like DynDNS. You can then access the camera via your public IP or DDNS hostname.
Does the DCS-5605 support wireless connectivity?
No, the DCS-5605 is a wired Ethernet camera. It does not have built-in Wi-Fi. You must connect it to a router or switch via an Ethernet cable.
How to update the firmware on the DCS-5605?
Download the latest firmware from the D-Link support website. Log into the camera's web interface, go to 'Maintenance' > 'Firmware Upgrade', browse to the downloaded file, and click 'Upgrade'. Do not power off during the update.
What is the maximum number of simultaneous users?
The DCS-5605 supports up to 10 simultaneous viewers. Performance may degrade with multiple active streams depending on your network bandwidth.
How to set up motion detection?
Log into the camera's web interface, go to 'Setup' > 'Motion Detection'. Enable motion detection, adjust sensitivity, and define detection zones. You can also configure actions such as sending email alerts or uploading snapshots to an FTP server.
Is the DCS-5605 weatherproof for outdoor use?
No, the DCS-5605 is designed for indoor use only. It is not weatherproof. For outdoor surveillance, consider an outdoor-rated model or install the camera under an eave with a protective housing.
How to mount the camera on a wall?
The camera comes with a mounting bracket. Use the included screws and anchors to attach the bracket to the wall. Then slide the camera onto the bracket and tighten the security screw. Ensure the camera is level for optimal viewing.
What power supply is required for the DCS-5605?
The camera supports Power over Ethernet (PoE) 802.3af or a DC 5V power adapter (2.5A). If using PoE, a PoE switch or injector is needed. If using DC power, use the original D-Link adapter or a compatible 5V/2.5A adapter.
User questions about DCS-5605 D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual DCS-5605 - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCS-5605 by D-LINK.