DCS-5230 - Surveillance Camera D-LINK - Free user manual and instructions
Find the device manual for free DCS-5230 D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | D-Link |
| Model | DCS-5230 |
| Product Type | Wired IP Surveillance Camera |
| Image Sensor | 1/4" CMOS |
| Maximum Resolution | 640 x 480 (VGA) |
| Frame Rate | Up to 30 fps |
| Lens Type | Fixed, 4.0mm, F2.0 |
| Field of View | Approx. 45° (horizontal) |
| Night Vision | IR LEDs, up to 5 meters |
| Network Interface | 10/100 Ethernet |
| Wireless | 802.11b/g (optional via adapter) |
| Power Supply | 5V DC, 2.5A (included adapter) |
| Power Consumption | Max 5W |
| Dimensions (W x H x D) | 65 x 110 x 65 mm |
| Weight | Approx. 200 g (without cables) |
| Mounting Type | Wall or ceiling mount (bracket included) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Key Features | Motion detection, email alerts, remote viewing, two-way audio (external mic/speaker) |
| Maintenance | Clean lens with dry cloth; keep vents clear; avoid humidity |
| Safety | Use only provided power adapter; do not expose to water; indoor use only |
| Spare Parts / Repairability | Contact D-Link support for replacement parts; not user-serviceable |
Frequently Asked Questions - DCS-5230 D-LINK
How do I reset the D-Link DCS-5230 to factory defaults?
Press and hold the Reset button on the side of the camera for about 10 seconds until the status LED blinks red. Release the button; the camera will reboot to factory settings.
What is the default IP address of the DCS-5230?
The default IP address is 192.168.0.20. You can access the camera via web browser after connecting to the same network.
How can I view the camera remotely?
You can view the camera remotely by forwarding port 80 on your router to the camera's local IP. Alternatively, use D-Link's mydlink service for easy remote access without port forwarding.
Does the DCS-5230 support night vision?
Yes, it has infrared LEDs that provide night vision up to approximately 5 meters (16 feet) in complete darkness.
What video formats are supported?
The camera supports MJPEG video compression. It can stream at resolutions up to 640x480 and frame rates up to 30 fps.
Can I use the DCS-5230 outdoors?
The DCS-5230 is indoor use only. It is not weatherproof. If outdoor use is required, place it under a covered area and protect it from direct exposure to rain or moisture.
How do I set up motion detection?
Access the camera's web interface, go to Motion Detection settings, enable it, and define up to three detection zones. You can also configure email alerts or FTP upload when motion is detected.
What is the maximum number of users that can view the camera simultaneously?
The DCS-5230 supports up to 10 simultaneous viewers without significant performance degradation. For more users, consider reducing video quality or using a dedicated streaming solution.
Why is the camera not showing any video?
Check that the camera is powered on and the Ethernet cable is connected. Verify that the IP address is correctly configured and not conflicting with another device. Also ensure that your web browser supports ActiveX or Java for viewing the video stream.
Can I mount the camera on the ceiling?
Yes, the camera can be mounted on the ceiling using the included bracket. The bracket allows both wall and ceiling installation. Ensure the screws are securely fastened to a firm surface.
User questions about DCS-5230 D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual DCS-5230 - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCS-5230 by D-LINK.