Mińsk - Uncategorized Xaoc - Free user manual and instructions
Find the device manual for free Mińsk Xaoc in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Module |
| Brand | Xaoc |
| Model | Mińsk |
| Width | 10 HP (2.0 inches) |
| Depth | 30 mm |
| Weight | 120 g |
| Power Supply | +12V / -12V via Eurorack bus |
| Current Draw | 60 mA (+12V), 40 mA (-12V) |
| Audio Inputs | 2 (Left/Right), 3.5 mm jacks |
| Audio Outputs | 2 (Left/Right), 3.5 mm jacks |
| CV Inputs | 2 (Cutoff, Resonance), 3.5 mm jacks |
| Main Functions | Stereo filter, saturation, VCA |
| Filter Types | Low-pass, high-pass, band-pass |
| Resonance | Adjustable, self-oscillating |
| VCA Mode | Linear or exponential response |
| Maintenance | Wipe with a dry, lint-free cloth |
| Safety Precautions | Do not expose to liquids; ensure proper mounting |
| Spare Parts | Contact Xaoc support for replacements |
| Reparability | Service manual available; DIY repair possible |
| General Information | Manual available for download in PDF format |
Frequently Asked Questions - Mińsk Xaoc
How do I connect the Mińsk module to my Eurorack system?
Use a standard Eurorack ribbon cable to connect the module to your power supply board. Ensure correct orientation: red stripe aligns with -12V as marked on the module.
What are the main controls on the Mińsk?
The module features knobs for Cutoff, Resonance, VCA Level, and a switch for filter type selection (LP/HP/BP). There are also CV attenuators.
Can I use the Mińsk as a standalone unit without a Eurorack case?
No, the Mińsk is designed exclusively for Eurorack systems and requires a powered Eurorack case to operate.
How do I calibrate the filter cutoff CV input?
Calibration is not user-adjustable. If you experience tracking issues, contact Xaoc support for recalibration instructions.
What is the maximum input signal level?
The Mińsk accepts Eurorack-level signals up to 10V peak-to-peak. Higher levels may cause distortion or damage.
How do I clean the module?
Disconnect power, then wipe the front panel and jacks with a soft, dry cloth. Avoid using solvents or abrasive materials.
My module is not producing any sound. What should I check?
Ensure the power cable is properly connected and the module is receiving +12V and -12V. Check audio cables and that the VCA knob is turned up.
Can I chain multiple Mińsk modules?
Yes, you can connect multiple units in series using patch cables. Each module processes the signal independently.
What is the warranty period?
Xaoc offers a 2-year warranty against manufacturing defects. Retain your original receipt for warranty claims.
Where can I find the user manual?
The manual is available for free download at notice-facile.com in PDF format. You can also request a translated version via email.
User questions about Mińsk Xaoc
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Mińsk - Xaoc and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mińsk by Xaoc.
USER MANUAL Mińsk Xaoc
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Xaoc
Model : Mińsk
Category : Uncategorized