QO-DP26-V2 - Flash Angler - Free user manual and instructions
Find the device manual for free QO-DP26-V2 Angler in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | External Flash |
| Brand | Angler |
| Model | QO-DP26-V2 |
| Guide Number | 26 (ISO 100, meters) |
| Zoom Coverage | 24–105mm |
| Power Source | 4× AA batteries (alkaline or NiMH) |
| Recycling Time | Approx. 0.3–5 seconds |
| Flash Modes | TTL, Manual, Multi (stroboscopic) |
| Wireless Control | Optical slave and wireless trigger (compatible) |
| Bounce Head | Vertical: -7° to +90°, Horizontal: 0–270° |
| Dimensions | 190 × 75 × 58 mm |
| Weight | Approx. 330 g (without batteries) |
| Display | LCD panel with backlight |
| Sync Voltage | Low voltage (≤ 6V) – safe for modern cameras |
| Care & Cleaning | Wipe with a dry, soft cloth. Avoid moisture and solvents. |
| Safety | Do not disassemble. Use only specified batteries. Avoid direct eye exposure. |
| Spare Parts & Repairability | No user-serviceable parts. Contact authorized service center. |
| General Information | Compatible with most DSLR and mirrorless cameras with standard hotshoe. |
Frequently Asked Questions - QO-DP26-V2 Angler
How do I set the flash to TTL mode?
Press the MODE button until 'TTL' appears on the LCD. The flash will automatically adjust power based on camera metering.
What is the maximum sync speed for this flash?
Typically up to 1/200s or 1/250s with focal plane shutters. Check your camera's manual for exact compatibility.
Can I use rechargeable batteries?
Yes, NiMH rechargeable AA batteries are recommended for faster recycling and lower cost. Avoid lithium batteries.
How many flashes can I get on fresh batteries?
Approximately 100–200 full-power flashes with alkaline batteries, up to 250 with NiMH.
How can I adjust the flash power manually?
Set the flash to Manual mode (M) and press the +/- buttons to select power levels from 1/1 (full) to 1/128.
What does 'Multi' mode do?
Multi (stroboscopic) mode fires a series of flashes at a set frequency and number, useful for motion capture effects.
How do I reset the flash to factory settings?
Press and hold the MODE and +/- buttons simultaneously for 3 seconds until the display resets.
Is the flash compatible with my camera?
It fits any standard ISO hotshoe. For TTL, compatibility depends on camera brand. Use in manual mode for universal use.
How do I clean the flash?
Use a soft, lint-free cloth slightly dampened with water. Do not use alcohol or abrasive cleaners. Avoid getting moisture in the hotshoe or battery compartment.
My flash is not firing. What should I check?
Ensure batteries are inserted correctly and charged. Check that the flash is firmly attached to the hotshoe and the camera's flash sync is enabled. If the red ready light is off, wait for recycling.
User questions about QO-DP26-V2 Angler
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Flash in PDF format for free! Find your manual QO-DP26-V2 - Angler and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QO-DP26-V2 by Angler.
USER MANUAL QO-DP26-V2 Angler
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Angler
Model : QO-DP26-V2
Category : Flash