Freedom PPA00-10859 - Uncategorized PETSAFE - Free user manual and instructions
Find the device manual for free Freedom PPA00-10859 PETSAFE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pet Containment System (Wireless Fence) |
| Brand | PetSafe |
| Model | Freedom PPA00-10859 |
| Transmitter Dimensions | 10.2 x 8.9 x 3.8 cm |
| Transmitter Weight | 0.2 kg |
| Power Source | AC adapter (100-240V, 50/60Hz) |
| Receiver Battery | Rechargeable lithium-ion, 2-3 hour charge |
| Coverage Area | Up to 0.5 acre (circular, adjustable radius 5-90 ft) |
| Waterproof Rating | Receiver collar: IPX7 (submersible up to 1m) |
| Training Modes | Tone, Vibration, Static (5 levels) |
| Number of Dogs Supported | Up to 2 (expandable with additional collars) |
| Collar Strap Material | Nylon, adjustable length |
| Indicator Lights | LED for battery status and correction level |
| Safety Features | Automatic shut-off after 30 seconds continuous correction, low battery warning |
| Maintenance | Clean transmitter with dry cloth; wipe collar with damp cloth |
| Included Items | Transmitter, receiver collar, charging adapter, test light, training flags, user manual |
| Warranty | 1 year limited |
Frequently Asked Questions - Freedom PPA00-10859 PETSAFE
How do I set up the PetSafe Freedom PPA00-10859?
Place the transmitter in a central location, plug it in, and adjust the boundary dial to your desired radius. Charge the collar for 2-3 hours, then fit it on your dog. Walk the boundary with the collar to set correction levels.
What is the maximum coverage area?
The system covers up to 0.5 acre with an adjustable circular radius from 5 to 90 feet. The actual range may vary based on terrain and interference.
How do I train my dog to use the system?
Start by placing flags along the boundary. Use tone-only mode for several days, then introduce vibration and static correction gradually. Always reward your dog for backing away from the boundary.
Is the collar waterproof?
Yes, the receiver collar has an IPX7 rating, meaning it can be submerged in up to 1 meter of water for 30 minutes. It is safe for swimming and rain.
How long does the battery last?
A full charge lasts approximately 2-3 weeks with normal use. The LED indicator will blink red when the battery is low.
Can I use the system with two dogs?
Yes, the transmitter supports up to two collars simultaneously. Additional collars (model PPA00-10860) are sold separately.
What should I do if the collar causes a skin irritation?
Ensure the collar is not too tight and remove it for 8 hours daily. Clean the contact points and your dog's neck regularly. If irritation persists, discontinue use and consult a veterinarian.
How do I replace the battery in the collar?
The collar has a rechargeable battery that cannot be replaced by the user. If the battery no longer holds a charge, contact PetSafe support for a replacement collar.
The system is beeping continuously. What does that mean?
Continuous beeping from the transmitter indicates a power interruption or a fault. Check the power adapter connection and ensure the transmitter is on a level surface. If the issue persists, reset the transmitter by unplugging it for 10 seconds.
Can I adjust the static correction level?
Yes, the collar has 5 adjustable levels of static correction. Use the test light to verify the level before fitting on your dog. Start at the lowest level and increase only if needed.
User questions about Freedom PPA00-10859 PETSAFE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Freedom PPA00-10859 - PETSAFE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Freedom PPA00-10859 by PETSAFE.