08093 - Compressor Draper - Free user manual and instructions
Find the device manual for free 08093 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Compressor |
| Brand | Draper |
| Model | 08093 |
| Dimensions (L x W x H) | 600 x 250 x 480 mm |
| Weight | 18 kg |
| Power Supply | 230 V / 50 Hz |
| Motor Power | 1.5 HP (1100 W) |
| Tank Capacity | 24 L |
| Maximum Pressure | 8 bar (116 psi) |
| Free Air Delivery | 50 L/min at 6 bar |
| Noise Level | 97 dB(A) |
| Lubrication | Oil lubricated |
| Oil Capacity | 0.3 L |
| Recommended Oil | SAE 30 non-detergent compressor oil |
| Safety Valve | Yes, preset at 8.5 bar |
| Pressure Regulator | Adjustable, with gauge |
| Air Outlet | Quick coupling, 1/4" BSP |
| Maintenance | Daily drain moisture, weekly check oil level, monthly clean air filter |
| Spare Parts Available | Air filter, oil, pressure switch, safety valve, seals |
| Repairability | Modular design with replaceable components |
| Certifications | CE, UKCA |
Frequently Asked Questions - 08093 Draper
What type of oil should I use for the Draper 08093 compressor?
Use SAE 30 non-detergent compressor oil. Do not use motor oil or detergent oil as they can damage the pump.
How do I drain the moisture from the tank?
Ensure the tank pressure is between 1-2 bar. Locate the drain valve at the bottom of the tank and turn it slowly to release water. Always wear eye protection.
What is the maximum pressure of this compressor?
The maximum pressure is 8 bar (116 psi). The safety valve is set to release at 8.5 bar to prevent overpressure.
Why won't my compressor start?
Common causes: power cord unplugged, thermal overload tripped, or low oil level. Check the oil and let the motor cool down before resetting.
How often should I change the oil?
Change the oil every 3 months or after 100 hours of use. Use a funnel to add SAE 30 oil up to the correct level.
Can I use this compressor for spray painting?
Yes, but you will need a water separator and pressure regulator to ensure clean, dry air at the correct pressure (typically 2-4 bar).
What is the noise level and how can I reduce it?
The noise level is 97 dB(A). To reduce noise, place the compressor on a rubber mat or use a noise enclosure, but ensure adequate ventilation.
How do I clean the air filter?
Remove the filter cover and take out the foam element. Wash it with warm soapy water, rinse, and let dry completely before reinstalling. Replace if damaged.
What is the recommended duty cycle?
The compressor has a 50% duty cycle (e.g., 5 minutes on, 5 minutes off). Continuous running can overheat the motor.
Where can I find replacement parts?
Spare parts such as air filters, oil, pressure switches, and valves are available from Draper dealers or online. Use the model number 08093 for reference.
User questions about 08093 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual 08093 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 08093 by Draper.
USER MANUAL 08093 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 08093
Category : Compressor