DH1060H5 - Heat pump Fisher & Paykel - Free user manual and instructions
Find the device manual for free DH1060H5 Fisher & Paykel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heat Pump Tumble Dryer |
| Brand | Fisher & Paykel |
| Model | DH1060H5 |
| Capacity | 7.5 kg |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption | 561 kWh/year |
| Noise Level | 66 dB(A) |
| Dimensions (H x W x D) | 850 mm x 600 mm x 600 mm |
| Weight | 44 kg |
| Power Supply | 230 V ~ 50 Hz |
| Rated Power Input | 900 W |
| Condensate Reservoir Capacity | 4.0 L |
| Number of Drying Programs | 12 |
| Control Type | Electronic with LED Display |
| Lint Filter | Easy-clean mesh filter |
| Condenser Maintenance | Auto-clean condenser system |
| Child Lock | Yes |
| Delay Start | Up to 24 hours |
| Reversing Drum | Yes |
| End of Cycle Signal | Audible |
| Spare Parts Availability | 7 years from Fisher & Paykel |
Frequently Asked Questions - DH1060H5 Fisher & Paykel
How do I clean the lint filter on the DH1060H5?
Open the door and pull out the lint filter located on the inner door frame. Remove lint by hand or with a vacuum cleaner. Rinse under running water if necessary and dry thoroughly before reinserting. Clean after every cycle for optimal performance.
What does the 'Empty Water Tank' indicator mean?
This indicator lights up when the condensate reservoir is full. Pull out the water tank, empty it into a sink, and reinsert it securely before restarting the dryer.
How do I clean the condenser?
The DH1060H5 features an auto-clean condenser system that flushes lint away automatically. However, for manual cleaning, access the condenser at the bottom front, rinse with water, and allow to dry before reinstalling.
Can I dry delicate fabrics like wool or silk?
Yes, the dryer has special programs for delicates. Use the 'Delicate' or 'Wool' program with low heat settings to prevent damage. Always check garment care labels before drying.
How do I activate the child lock?
Press and hold the 'Child Lock' button (indicated by a padlock icon) for 3 seconds until a beep sounds and the lock symbol appears on the display. Repeat to deactivate.
What is the maximum load capacity for the heat pump dryer?
The maximum dry capacity is 7.5 kg. Overloading can cause poor drying results and increased energy consumption. For best results, fill the drum loosely.
How do I set a delayed start?
Press the 'Delay Start' button repeatedly to select the desired delay time (1-24 hours). Then select a drying program and press 'Start'. The dryer will begin after the set delay.
Why is the drying cycle longer than expected?
Heat pump dryers operate at lower temperatures, so cycles are naturally longer (typically 1.5-2.5 hours). Factors like load size, fabric type, and room temperature can also affect cycle time.
What should I do if the dryer stops mid-cycle?
Check if the water tank is full or the lint filter is blocked. Also ensure the door is fully closed. If the error persists, consult the manual for fault codes or contact Fisher & Paykel support.
Is the DH1060H5 ventless?
Yes, as a heat pump dryer, it condenses moisture into a water tank, so no external venting is required. The extracted water is collected in the condensate reservoir for easy disposal.
User questions about DH1060H5 Fisher & Paykel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heat pump in PDF format for free! Find your manual DH1060H5 - Fisher & Paykel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DH1060H5 by Fisher & Paykel.
USER MANUAL DH1060H5 Fisher & Paykel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fisher & Paykel
Model : DH1060H5
Category : Heat pump